7688dev
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| 7688dev [2021/04/29 02:43] – admin | 7688dev [2025/10/14 06:22] (current) – external edit 127.0.0.1 | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ~~NOTOC~~ | ~~NOTOC~~ | ||
| + | ====== BIT模组，百兆网关御用方案 ====== | ||
| - | <WRAP center round important 70%> | ||
| - | == 重要！BIT3.1模组配置调整计划 == | ||
| - | 详情：[[bit31diff]] | ||
| - | </ | ||
| <WRAP center round tip 70%> | <WRAP center round tip 70%> | ||
| Line 18: | Line 15: | ||
| ==== ①硬件 ==== | ==== ①硬件 ==== | ||
| * [[7688hdk|7688芯片资料]] | * [[7688hdk|7688芯片资料]] | ||
| - | * [[brief_bit_Q|邮票孔模组(代号Q)]] | ||
| * [[brief_bit31|邮票孔模组(代号3.1)]] | * [[brief_bit31|邮票孔模组(代号3.1)]] | ||
| * [[bit51|BIT5.1金手指模组·底板KIT]] | * [[bit51|BIT5.1金手指模组·底板KIT]] | ||
| * [[bit5|BIT5.0金手指模组]] | * [[bit5|BIT5.0金手指模组]] | ||
| - | + | | |
| - | 金手指优势 \\ | + | * [[brief_bit3|邮票孔模组(老款, |
| - | 1. 省去邮票孔量产与焊接厂的磨合过程，100%良率。 | + | * [[brief_bit|排针模组(代号4.0)]] |
| - | 2. 邮票孔模组要考虑高TG板材，焊接温度曲线，制作昂贵的测试架，模组回流焊变型，以及与底板平整度契合等问题，金手指统统没这些问题，所以成本更低。 | + | |
| - | 3. 维护更方便，随时可拆下来更换配置。 | + | |
| - | + | ||
| - | | + | |
| - | * [[brief_bit3|邮票孔模组(老款, | + | |
| - | * [[brief_bit|排针模组(代号4.0)]] | + | |
| * [[qa_neobit|常见问题]] | * [[qa_neobit|常见问题]] | ||
| * [[soft|SDK环境简介]] | * [[soft|SDK环境简介]] | ||
| Line 40: | Line 30: | ||
| ==== ②开发之前 ==== | ==== ②开发之前 ==== | ||
| * [[firmware|Uboot和OpenWrt固件(openwrt_widora)]] | * [[firmware|Uboot和OpenWrt固件(openwrt_widora)]] | ||
| - | * [[fw_new|新主线固件(基于21.02)]] | ||
| * [[flash|刷机]] | * [[flash|刷机]] | ||
| * [[flashask|刷机常见问题]] | * [[flashask|刷机常见问题]] | ||
| Line 101: | Line 90: | ||
| * [[firewall|防火墙FIREWALL配置]] | * [[firewall|防火墙FIREWALL配置]] | ||
| * [[iwpriv|iwpriv常用命令]] | * [[iwpriv|iwpriv常用命令]] | ||
| - | * [[proxy|反向代理]] | ||
| * [[testnet|检测网线插拔]] | * [[testnet|检测网线插拔]] | ||
| - | * [[mt76|成长中的mt76开源wifi驱动]] | ||
| </ | </ | ||
7688dev.1619664225.txt.gz · Last modified: (external edit)