~~NOTOC~~

{{::r3c-top.jpg?400  |}} {{  ::r3c-bot.jpg?400  |  }}

=====Introduction=====

This micro development board is specially designed to run Linux. Despite a mini body, it has all the vital functions. Equipped with F1C200S as the maincontroller chip, the board offers various commonly-used peripheral ports: GPIO, I2C & SPI, SDIO, Audio port(record, play), Video(RGB565 Display, touch, DVP), USB Host, OTG, etc. Besides, the board comes with a built-in 64MB DDR and onboard 128MB Nand Flash, which fully supports Linux ecology and running complete Python.

=====Specification=====
  * Built-in 64MB DDR
  * On-board 128MB Nand Flash
  * 420MHz system clock default frequency, able to be overclocked to 700MHz and above
  * Rich GPIO pins
  * Onboard SDIO port for connecting SD card or SDIO WiFi + BT module
  * DVP camera interface in support of cameras such as OV2640, GC0328, etc.
  * RGB565 display interface and 6-wire touch interface
  * Onboard mic and power amplifier
  * Low power consumption
  * Support complete Python running


=====Getting Start=====
  * https://wiki.dfrobot.com/MangoPi_R3_SKU_DFR0780

=====MPi-R1/2/3/3c=====
  * R1 (first commmit) 
  * R2 (added DVP and audio amp vs R1） 
  * R3 (fix R2 rtp interrupt, added ctp and buildroot, Mainly the nand version)
  * R3c (change to ch340e from CP2104 vs R3)


=====More=====
[[f1c200s]]