MT7688这类“路由器”SOC最大的强项还是网络上，互联效果比普通SOC好很多，这一节讲讲常用的WI-FI操作。
aps命令运行之后大约5秒，在控制台打印扫描到的结果。
Widora AP scan. ra0 get_site_survey: Ch SSID BSSID Security Signal(%)W-ModeD 8 Widora-2-2-605 9c:3d:cf:c0:28:18 WPA2PSK/AES 70 11b/g/ 3 0xE5B08FE7B1B3E585B1E4BAAB576946695F3641363766:09:80:7d:6a:68 NONE 65 3 AndroidAP-2B1EA4 64:09:80:7d:6a:68 WPA1PSKWPA2PSK/TKIPAES 65 11b/g/ 11 505 f4:83:cd:45:65:50 WPA1PSKWPA2PSK/AES 24 11b/g/ 9 Xiaomi_10BC 8c:be:be:2c:10:bd WPA1PSKWPA2PSK/TKIPAES 23 11b/g/ 11 TP-LINK_4392 ec:26:ca:e4:43:92 WPA1PSKWPA2PSK/AES 20 11b/g/ 8 HUAWEI-FU2D9Y f4:cb:52:00:99:3c WPA1PSKWPA2PSK/AES 20 11b/g/ 7 WJQ-2.5G 94:77:2b:6c:f3:74 WPA1PSKWPA2PSK/AES 13 11b/g/ 6 PDCN cc:81:da:5f:3f:48 WPA2PSK/AES 13 11b/g/ 7 Tenda_54D410 c8:3a:35:54:d4:10 WPAPSK/AES 13 11b/g/ 1 shiwanghome 44:6e:e5:8f:28:08 WPA2PSK/AES 10 11b/g/ 2 0xE5B08FE7B1B3E585B1E4BAAB576946695F4545393566:09:80:1d:ee:96 WPA1PSKWPA2PSK/TKIPAES 10 1 mylove1202 20:76:93:30:f8:94 WPA1PSKWPA2PSK/AES 10 11b/g/ 9 BJDXB 04:02:1f:54:6c:50 WPA1PSKWPA2PSK/AES 7 11b/g/ 7 Tenda_396938 c8:3a:35:39:69:38 WPAPSK/AES 7 11b/g/ 1 GOD d0:c7:c0:72:b1:5e WPA1PSKWPA2PSK/AES 7 11b/g/ 1 CU_ZxGN 68:8a:f0:49:24:a8 WPA1PSKWPA2PSK/AES 5 11b/g/ 11 TP-LINK_3386 b8:f8:83:cc:33:86 WPA1PSKWPA2PSK/TKIPAES 5 11b/g/ 11 TP-LINK_650A 14:75:90:62:65:0a WPA1PSKWPA2PSK/AES 2 11b/g/ 1 123456 b8:55:10:12:0e:69 WPA2PSK/AES 0 11b/g/ 11 TP-LINK_1BFC 80:89:17:62:1b:fc WPA1PSKWPA2PSK/AES 0 11b/g/
wifimode apsta ssid key命令，ssid和key分别是你的家庭Wi-Fi用户名和密码。
root@Widora:/# widora_mode repeater Widora-2-2-605 xxxxxxxxxx [ 351.770000] br-lan: port 2(ra0) entered disabled state [ 351.780000] device ra0 left promiscuous mode [ 351.780000] br-lan: port 2(ra0) entered disabled state uci: Entry not found [ 352.410000] br-lan: port 1(eth0) entered disabled state [ 352.500000] device eth0 left promiscuous mode [ 352.510000] br-lan: port 1(eth0) entered disabled state [ 352.530000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready root@Widora:/# [ 354.470000] device eth0 entered promiscuous mode [ 354.530000] br-lan: port 1(eth0) entered forwarding state [ 354.530000] br-lan: port 1(eth0) entered forwarding state [ 356.530000] br-lan: port 1(eth0) entered forwarding state [ 357.760000] ===================================================== [ 357.760000] Channel 1 : Busy Time = 10409, Skip Channel = FALSE [ 357.770000] Channel 2 : Busy Time = 7031, Skip Channel = FALSE [ 357.770000] Channel 3 : Busy Time = 4505, Skip Channel = FALSE [ 357.780000] Channel 4 : Busy Time = 7659, Skip Channel = FALSE [ 357.790000] Channel 5 : Busy Time = 9640, Skip Channel = FALSE [ 357.790000] Channel 6 : Busy Time = 11197, Skip Channel = FALSE [ 357.800000] Channel 7 : Busy Time = 9685, Skip Channel = FALSE [ 357.800000] Channel 8 : Busy Time = 6946, Skip Channel = FALSE [ 357.810000] Channel 9 : Busy Time = 8711, Skip Channel = FALSE [ 357.810000] Channel 10 : Busy Time = 16352, Skip Channel = FALSE [ 357.820000] Channel 11 : Busy Time = 26003, Skip Channel = FALSE [ 357.830000] Channel 12 : Busy Time = 22361, Skip Channel = TRUE [ 357.830000] Channel 13 : Busy Time = 10416, Skip Channel = TRUE [ 357.840000] ===================================================== [ 357.850000] Rule 3 Channel Busy time value : Min Channel Busy ==> Select Channel 3 [ 357.850000] Min Channel Busy = 4505 [ 357.860000] BW = 20 [ 357.890000] |--------------------------------------------------------| [ 357.890000] |------------Widora wifi driver--version:1.2-------------| [ 357.900000] |Copyright 2016-2017 by YuanChenMang. All rights reserved| [ 357.910000] | This Driver licensing-only runs on Widora! | [ 357.910000] | Found bug? Please contact widora@qq.com , thanks! | [ 357.920000] |--------------------------------------------------------| [ 359.160000] device ra0 entered promiscuous mode [ 359.160000] br-lan: port 2(ra0) entered forwarding state [ 359.170000] br-lan: port 2(ra0) entered forwarding state [ 359.180000] device apcli0 entered promiscuous mode [ 361.170000] br-lan: port 2(ra0) entered forwarding state [ 363.530000] br-lan: port 3(apcli0) entered forwarding state [ 363.540000] br-lan: port 3(apcli0) entered forwarding state [ 365.080000] AP-Client probe response: SSID=, BSSID=9c:3d:cf:c0:28:18 [ 365.090000] APCLI LINK UP - IF(apcli0) AuthMode(7)=WPA2PSK, WepStatus(6)=AES! [ 365.540000] br-lan: port 3(apcli0) entered forwarding state [ 365.550000] br-lan: received packet on apcli0 with own addr
看到了APCLI LINK UP，那么WIFI就连接上了。
ap_client命令用来检查是否连上上级AP，返回“ok”代表已经连接好，否则返回"no"
root@Widora:/# ap_client ok root@Widora:/# ping qq.com PING qq.com (125.39.240.113): 56 data bytes 64 bytes from 125.39.240.113: seq=0 ttl=47 time=7.877 ms 64 bytes from 125.39.240.113: seq=1 ttl=47 time=13.103 ms ^C --- qq.com ping statistics --- 2 packets transmitted, 2 packets received, 0% packet loss round-trip min/avg/max = 7.877/10.490/13.103 ms root@Widora:/#
有时，想要看有多少设备连接到Widora的WI-FI：
root@Widora:/# iwpriv ra0 show stainfo [ 710.290000] [ 710.300000] HT Operating Mode : 0 [ 710.300000] [ 710.300000] [ 710.300000] MAC MODE AID BSS PSM WMM MIMOPS RSSI0/1/2 PhMd BW MCS SGI STBC Idle Rate [ 710.310000] A8:5B:78:7E:1B:CB 200012 0 1 1 0 -33/0 /0 HTMIX 20M 7 1 0 299 72 0 , 314, 100% [ 710.330000] MaxCap:HTMIX 20M 7 1 0 [ 710.330000] root@Widora:/#