Differences

This shows you the differences between two versions of the page.

--- f1c200s [2022/03/15 01:44] – admin
+++ f1c200s [2025/10/14 06:22] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
 ~~NOTOC~~
+=====Hardware=====
+  * [[f1c200_chip|F1C100s/F1C200s Chip]]
+  * [[TINY200|Hardware]]
-===F1C200s===
-^  BOARD  ^  CHIP  ^  HW  ^  SW  ^  FW  ^  DOCS  ^
-| MPi-R1 |  [[f1c200_chip|F1C200s]]  |   {{:zh:tiny200-sch.pdf}}  |  [[f1c_br]] \\ [[f1c_mainline]]  |
-| MPi-R2 | ::: |  {{ ::f1c200s_sch.pdf}} {{::periph.pdf}}  | ::: |
-| MPi-R3 | ::: |  {{ ::f200s-r3.pdf}} {{ ::periph-r3.pdf |}}  | ::: |
-| MPi-R3c | ::: |  {{ ::r3c-sch.pdf |}}  | ::: |
+=====Firmware=====
+20210511,username: root , nopasswd
+  * NAND: {{ ::sysimage-nand-120mb.zip |}}
+  * NOR:  {{ ::sysimage-nor.zip |}}
+  * SDCARD: {{ ::r3-sdcard-20220130.zip |}}
+=====Develop=====
+  * [[f1c_br|Buildroot env]]
+  * [[f1c_mainline|compile]]
-<WRAP group>
+===Buildroot===
-<WRAP half column>
-====TINY系列开发板====
+SPL:
-  * [[f1c200_chip|F1C200s芯片资料汇总]]
+  * SPI NOR Flash (W25Qxx..)
-  * [[s3|S3芯片资料]]
+  * SPI NAND Flash (GD5F1GQ4UAxxG..)
-  * [[x3|X3芯片资料]]
+  * MMC 0 (4-bit TF)
-  * [[TINY200|TINY200一体化开发板]]
+  * MMC 1 (1-bit TF)
-  * [[R11|R11模组]]
+U-Boot:
-  * [[R11_KIT|R11底板]]
+  * Basic LCD/GPIO背光
+  * SF Devices
+  * MTD Devices
+  * USB Peripheral
+  * USB Mass Storage Drive Enulator
+  * DFU
+  * TF
+Linux:
+  * Simple Peripheral: GPIO, SPI, UART, IIC, SDIO, PWM
+  * DMA Controller
+  * Audio Codec: Playback, Mic-IN
+  * USB: OTG Mode, Peripheral Mode, Host Mode
+  * DVP Camera: OV2640, OV5640
+  * Display Engine: Frontend, Backend, TCON
+  * Keypad ADC
+  * AW9523B GPIO Expand
+=====Manual=====
+  * [[https://wiki.dfrobot.com/MangoPi_R3_SKU_DFR0780|DFrobot Manual]]
-</WRAP>
-<WRAP half column>
-====开发专题====
-  * [[200SDK|200SDK]]
-</WRAP>
-</WRAP>