welcome to see widora.cn

User Tools

Site Tools

Trace: • ntp • brief_bit_comp • esp8285flash • uart_console • flashask • lora_dev • bit_ref • sd-nand • netmode • bit3_ref
version

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
version [2018/04/12 06:15] – adminversion [2025/10/14 06:22] (current) – external edit 127.0.0.1
Line 46: Line 46:
      
 <code bash> <code bash>
-  Widora by mango,V1.0.7                                                           +Widora by mango,V1.0.8 
-                                                                                 + 
-  Board: Ralink APSoC DRAM:  128 MB                                                +Board: Ralink APSoC DRAM:  128 MB 
-  relocate_code Pointer at: 87fb4000                                               +relocate_code Pointer at: 87fb4000 
-  ***********************                                                          +flash manufacture id: ef, device id 40 19 
-  Watchdog Reset Occurred                                                          +find flash: W25Q256FV 
-  ***********************                                                          +*** Warning - bad CRC, using default environment 
-  flash manufacture id: c2, device id 20 18                                        + 
-  find flash: MX25L12805D                                                          +============================================  
-  *** Warning - bad CRC, using default environment                                 +Ralink UBoot Version: 4.3.0.0 
-                                                                                 +--------------------------------------------  
-  ============================================                                     +ASIC 7628_MP (Port5<->None) 
-  Ralink UBoot Version: 4.3.0.0                                                    +DRAM component: 1024 Mbits DDR, width 16 
-  --------------------------------------------                                     +DRAM bus: 16 bit 
-  ASIC 7628_MP (Port5<->None)                                                      +Total memory: 128 MBytes 
-  DRAM component: 1024 Mbits DDR, width 16                                         +Flash component: SPI Flash 
-  DRAM bus: 16 bit                                                                 +Date:Jun 12 2018  Time:15:16:26 
-  Total memory: 128 MBytes                                                         +============================================  
-  Flash component: SPI Flash                                                       +icache: sets:512, ways:4, linesz:32 ,total:65536 
-  Date:Dec 26 2017  Time:20:59:50                                                  +dcache: sets:256, ways:4, linesz:32 ,total:32768  
-  ============================================                                     + 
-  icache: sets:512, ways:4, linesz:32 ,total:65536                                 + ##### The CPU freq = 580 MHZ ####  
-  dcache: sets:256, ways:4, linesz:32 ,total:32768                                 + estimate memory size =128 Mbytes 
-                                                                                 +RESET MT7628 PHY!!!!!! ONLY 0 
-   ##### The CPU freq = 580 MHZ ####                                               +MT7688 gpio init : wled and wdt by mango 
-   estimate memory size =128 Mbytes                                                + 
-  RESET MT7628 PHY!!!!!!MT7688 gpio init : wled and wdt by mango                                                                                     +if you press the WPS button will automatically enter the Update mode 
-                                                                                 + 
-  if you press the WPS button will automatically enter the Update mode             +0 
-                                                                                 +1 
-  0                                                                                +2 
-  * +3 
-  * +4 
-  *                                                                               +5 
-  9                                                                                +6 
-  Please choose the operation:                                                     +7 
-   1: Load system code to SDRAM via TFTP.                                        +8 
-   2: Load system code then write to Flash via TFTP.                             +9 
-   3: Boot system code via Flash (default).                                      +Please choose the operation:  
-   4: Entr boot command line interface.                                          +   1: Load system code to SDRAM via TFTP.  
-   5: Entr ALL LED test mode.                                                    +   2: Load system code then write to Flash via TFTP.  
-   6: Entr Web failsafe mode.                                                    +   3: Boot system code via Flash (default). 
-   7: Load Boot Loader code then write to Flash via Serial.                      +   4: Entr boot command line interface. 
-   9: Load Boot Loader code then write to Flash via TFTP.                        +   5: Entr ALL LED test mode. 
-   0                                                                               +   6: Entr Web failsafe mode. 
-                                                                                 +   7: Load Boot Loader code then write to Flash via Serial.  
-  3: System Boot system code via Flash.                                            +   9: Load Boot Loader code then write to Flash via TFTP.  
-  ## Booting image at bc050000 ...                                                 + 0  
-   Image Name:   MIPS OpenWrt Linux-3.18.29                                      +    
-   Image Type:   MIPS Linux Kernel Image (lzma compressed)                       +3: System Boot system code via Flash. 
-   Data Size:    1240442 Bytes =  1.2 MB                                         +## Booting image at bc050000 ... 
-   Load Address: 80000000                                                        +   Image Name:   MIPS OpenWrt Linux-3.18.29 
-   Entry Point:  80000000                                                        +   Image Type:   MIPS Linux Kernel Image (lzma compressed) 
-   Verifying Checksum ... OK                                                     +   Data Size:    1150305 Bytes =  1.1 MB 
-   Uncompressing Kernel Image ... OK                                             +   Load Address: 80000000 
-  No initrd                                                                        +   Entry Point:  80000000 
-  ## Transferring control to Linux (at address 80000000) ...                       +   Verifying Checksum ... OK 
-  ## Giving linux memsize in MB, 128                                               +   Uncompressing Kernel Image ... OK 
-                                                                                 +No initrd 
-  Starting kernel ...                                                              +## Transferring control to Linux (at address 80000000) ... 
-                                                                                 +## Giving linux memsize in MB, 128 
-  [    0.000000] Linux version 3.18.29 (mango@localhost) (gcc version 4.8.3 (Open7 + 
-  [    0.000000] Board has DDR2                                                    +Starting kernel ... 
-  [    0.000000] Analog PMU set to hw control                                      + 
-  [    0.000000] Digital PMU set to hw control                                     +[    0.000000] Linux version 3.18.29 (mango@mangodeMBP.lan) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r49378) ) #7 Mon Aug 20 18:37:41 CS8 
-  [    0.000000] SoC Type: MediaTek MT7688 ver:1 eco:2                             +[    0.000000] Board has DDR2 
-  [    0.000000] bootconsole [early0] enabled                                      +[    0.000000] Analog PMU set to hw control 
-  [    0.000000] CPU0 revision is: 00019655 (MIPS 24KEc)                           +[    0.000000] Digital PMU set to hw control 
-  [    0.000000] MIPS: machine is Widora-NEO                                       +[    0.000000] SoC Type: MediaTek MT7688 ver:1 eco:2 
-  [    0.000000] Determined physical RAM map:                                      +[    0.000000] bootconsole [early0] enabled 
-  [    0.000000]  memory: 08000000 @ 00000000 (usable)                             +[    0.000000] CPU0 revision is: 00019655 (MIPS 24KEc) 
-  [    0.000000] Initrd not found or empty - disabling initrd                      +[    0.000000] MIPS: machine is WIDORA-NEO 
-  [    0.000000] Zone ranges:                                                      +[    0.000000] Determined physical RAM map: 
-  [    0.000000]   Normal   [mem 0x00000000-0x07ffffff]                            +[    0.000000]  memory: 08000000 @ 00000000 (usable) 
-  [    0.000000] Movable zone start for each node                                  +[    0.000000] Initrd not found or empty - disabling initrd 
-  [    0.000000] Early memory node ranges                                          +[    0.000000] Zone ranges: 
-  [    0.000000]   node   0: [mem 0x00000000-0x07ffffff]                           +[    0.000000]   Normal   [mem 0x00000000-0x07ffffff] 
-  [    0.000000] Initmem setup node 0 [mem 0x00000000-0x07ffffff]                  +[    0.000000] Movable zone start for each node 
-  [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.   +[    0.000000] Early memory node ranges 
-  [    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bys +[    0.000000]   node   0: [mem 0x00000000-0x07ffffff] 
-  [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pa2 +[    0.000000] Initmem setup node 0 [mem 0x00000000-0x07ffffff] 
-  [    0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jf2 +[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. 
-  [    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)               +[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes 
-  [    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)    +[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512 
-  [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)      +[    0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2 
-  [    0.000000] Writing ErrCtl register=0007cff8                                  +[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) 
-  [    0.000000] Readback ErrCtl register=0007cff8                                 +[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) 
-  [    0.000000] Memory: 126004K/131072K available (2727K kernel code, 139K rwdat) +[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) 
-  [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1        +[    0.000000] Writing ErrCtl register=00043090 
-  [    0.000000] NR_IRQS:256                                                       +[    0.000000] Readback ErrCtl register=00043090 
-  [    0.000000] intc: using register map from devicetree                          +[    0.000000] Memory: 126272K/131072K available (2544K kernel code, 124K rwdata, 520K rodata, 196K init, 185K bss, 4800K reserved) 
-  [    0.000000] CPU Clock: 580MHz                                                 +[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 
-  [    0.000000] clocksource_of_init: no matching clocksources found               +[    0.000000] NR_IRQS:256 
-  [    0.000000] Console: colour dummy device 80x25                                +[    0.000000] intc: using register map from devicetree 
-  [    0.000000] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)           +[    0.000000] CPU Clock: 580MHz 
-  [    0.060000] pid_max: default: 32768 minimum: 301                              +[    0.000000] clocksource_of_init: no matching clocksources found 
-  [    0.060000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)       +[    0.000000] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216) 
-  [    0.070000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)  +[    0.060000] pid_max: default: 32768 minimum: 301 
-  [    0.070000] pinctrl core: initialized pinctrl subsystem                       +[    0.060000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) 
-  [    0.080000] NET: Registered protocol family 16                                +[    0.070000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) 
-  [    0.100000] mt7621_gpio 10000600.gpio: registering 32 gpios                   +[    0.070000] pinctrl core: initialized pinctrl subsystem 
-  [    0.110000] mt7621_gpio 10000600.gpio: registering 32 gpios                   +[    0.080000] NET: Registered protocol family 16 
-  [    0.110000] mt7621_gpio 10000600.gpio: registering 32 gpios                   +[    0.100000] mt7621_gpio 10000600.gpio: registering 32 gpios 
-  [    0.120000] vgaarb: loaded                                                    +[    0.110000] mt7621_gpio 10000600.gpio: registering 32 gpios 
-  [    0.120000] Switched to clocksource MIPS                                      +[    0.110000] mt7621_gpio 10000600.gpio: registering 32 gpios 
-  [    0.130000] NET: Registered protocol family 2                                 +[    0.120000] Switched to clocksource MIPS 
-  [    0.130000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)   +[    0.120000] NET: Registered protocol family 2 
-  [    0.140000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)          +[    0.130000] TCP established hash table entries: 1024 (order: 0, 4096 bytes) 
-  [    0.140000] TCP: Hash tables configured (established 1024 bind 1024)          +[    0.130000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) 
-  [    0.150000] TCP: reno registered                                              +[    0.140000] TCP: Hash tables configured (established 1024 bind 1024) 
-  [    0.150000] UDP hash table entries: 256 (order: 0, 4096 bytes)                +[    0.140000] TCP: reno registered 
-  [    0.160000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)           +[    0.150000] UDP hash table entries: 256 (order: 0, 4096 bytes) 
-  [    0.170000] NET: Registered protocol family 1                                 +[    0.150000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) 
-  [    0.170000] futex hash table entries: 256 (order: -1, 3072 bytes)             +[    0.160000] NET: Registered protocol family 1 
-  [    0.190000] squashfs: version 4.0 (2009/01/31) Phillip Lougher                +[    0.170000] futex hash table entries: 256 (order: -1, 3072 bytes) 
-  [    0.190000] jffs2: version 2.2 (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c). +[    0.180000] squashfs: version 4.0 (2009/01/31) Phillip Lougher 
-  [    0.200000] msgmni has been set to 246                                        +[    0.190000] jffs2: version 2.2 (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. 
-  [    0.220000] io scheduler noop registered                                      +[    0.200000] msgmni has been set to 246 
-  [    0.230000] io scheduler deadline registered (default)                        +[    0.210000] io scheduler noop registered 
-  [    0.230000] drivers/phy/phy-ralink-usb.c:ralink_usb_phy_probe[336]            +[    0.210000] io scheduler deadline registered (default) 
-  [    0.240000] drivers/phy/phy-ralink-usb.c:ralink_usb_phy_probe[350]            +[    0.220000] drivers/phy/phy-ralink-usb.c:ralink_usb_phy_probe[336] 
-  [    0.250000] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled          +[    0.220000] drivers/phy/phy-ralink-usb.c:ralink_usb_phy_probe[350] 
-  [    0.250000] console [ttyS0] disabled                                          +[    0.230000] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled 
-  [    0.260000] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baudA +[    0.240000] console [ttyS0] disabled 
-  [    0.270000] console [ttyS0] enabled                                           +[    0.240000] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A 
-  [    0.270000] console [ttyS0] enabled                                           +[    0.250000] console [ttyS0] enabled 
-  [    0.270000] bootconsole [early0] disabled                                     +[    0.250000] console [ttyS0] enabled 
-  [    0.270000] bootconsole [early0] disabled                                     +[    0.260000] bootconsole [early0] disabled 
-  [    0.280000] 10000d00.uart1: ttyS1 at MMIO 0x10000d00 (irq = 29, base_baud = A +[    0.260000] bootconsole [early0] disabled 
-  [    0.290000] 10000e00.uart2: ttyS2 at MMIO 0x10000e00 (irq = 30, base_baud = A +[    0.270000] 10000d00.uart1: ttyS1 at MMIO 0x10000d00 (irq = 29, base_baud = 2500000) is a 16550A 
-  [    0.300000] spi-mt7621 10000b00.spi: sys_freq: 193333333                      +[    0.280000] 10000e00.uart2: ttyS2 at MMIO 0x10000e00 (irq = 30, base_baud = 2500000) is a 16550A 
-  [    0.310000] m25p80 spi32766.0: found mx25l12805d, expected w25q128            +[    0.290000] spi-mt7621 10000b00.spi: sys_freq: 193333333 
-  [    0.320000] m25p80 spi32766.0: mx25l12805d (16384 Kbytes)                     +[    0.300000] m25p80 spi32766.0: w25q256 (32768 Kbytes) 
-  [    0.320000] m25p80 spi32766.0: using chunked io                               +[    0.300000] m25p80 spi32766.0: using chunked io 
-  [    0.330000] 4 ofpart partitions found on MTD device spi32766.0                +[    0.310000] 4 ofpart partitions found on MTD device spi32766.0 
-  [    0.330000] Creating 4 MTD partitions on "spi32766.0":                        +[    0.310000] Creating 4 MTD partitions on "spi32766.0": 
-  [    0.340000] 0x000000000000-0x000000030000 : "u-boot"                          +[    0.320000] 0x000000000000-0x000000030000 : "u-boot" 
-  [    0.350000] 0x000000030000-0x000000040000 : "u-boot-env"                      +[    0.320000] 0x000000030000-0x000000040000 : "u-boot-env" 
-  [    0.350000] 0x000000040000-0x000000050000 : "factory"                         +[    0.330000] 0x000000040000-0x000000050000 : "factory" 
-  [    0.360000] 0x000000050000-0x000001000000 : "firmware"                        +[    0.340000] 0x000000050000-0x000002000000 : "firmware" 
-  [    0.390000] 2 uimage-fw partitions found on MTD device firmware               +[    0.400000] 2 uimage-fw partitions found on MTD device firmware 
-  [    0.400000] 0x000000050000-0x00000017edba : "kernel"                          +[    0.410000] 0x000000050000-0x000000168da1 : "kernel" 
-  [    0.410000] 0x00000017edba-0x000001000000 : "rootfs"                          +[    0.420000] 0x000000168da1-0x000002000000 : "rootfs" 
-  [    0.410000] mtd: device 5 (rootfs) set to be root filesystem                  +[    0.420000] mtd: device 5 (rootfs) set to be root filesystem 
-  [    0.420000] 1 squashfs-split partitions found on MTD device rootfs            +[    0.430000] 1 squashfs-split partitions found on MTD device rootfs 
-  [    0.420000] 0x000000640000-0x000001000000 : "rootfs_data"                     +[    0.440000] 0x000000620000-0x000002000000 : "rootfs_data" 
-  [    0.430000] fbtft_of_value: buswidth = 8                                      +[    0.450000] ralink_soc_eth 10100000.ethernet eth0: ralink at 0xb0100000, irq 5 
-  [    0.440000] fbtft_of_value: rotate = 0                                        +[    0.460000] mt7621_wdt 10000100.watchdog: Initialized 
-  [    0.440000] fbtft_of_value: fps = 10                                          +[    0.470000] TCP: cubic registered 
-  [    0.440000] fbtft_of_value: txbuflen = 16                                     +[    0.470000] NET: Registered protocol family 17 
-  [    1.230000] Console: switching to colour frame buffer device 16x20            +[    0.480000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. 
-  [    1.240000] graphics fb0: fb_st7735r frame buffer, 128x160, 40 KiB video memz +[    0.490000] 8021q: 802.1Q VLAN Support v1.8 
-  [    1.260000] ralink_soc_eth 10100000.ethernet eth0: ralink at 0xb0100000, irq5 +[    0.500000] VFS: Mounted root (squashfs filesystem) readonly on device 31:5. 
-  [    1.270000] TCP: cubic registered                                             +[    0.510000] Freeing unused kernel memory: 196K (8031f000 - 80350000) 
-  [    1.270000] NET: Registered protocol family 17                                +[    1.770000] init: Console is alive 
-  [    1.280000] bridge: automatic filtering via arp/ip/ip6tables has been deprec. +[    1.780000] init: - watchdog - 
-  [    1.290000] 8021q: 802.1Q VLAN Support v1.8                                   +[    4.110000] usbcore: registered new interface driver usbfs 
-  [    1.300000] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.  +[    4.120000] usbcore: registered new interface driver hub 
-  [    1.310000] Freeing unused kernel memory: 212K (8035b000 - 80390000)          +[    4.120000] usbcore: registered new device driver usb 
-  [    2.560000] init: Console is alive                                            +[    4.130000] reg_opt_init 
-  [    4.910000] usbcore: registered new interface driver usbfs                    +[    4.140000] exFAT: Version 1.2.9 
-  [    4.920000] usbcore: registered new interface driver hub                      +[    4.180000] SCSI subsystem initialized 
-  [    4.920000] usbcore: registered new device driver usb                         +[    4.190000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 
-  [    4.930000] reg_opt_init                                                      +[    4.200000] ehci-platform: EHCI generic platform driver 
-  [    4.940000] exFAT: Version 1.2.9                                              +[    4.370000] U2PHY P0 set SRCTRL calibration value: 7 
-  [    4.980000] SCSI subsystem initialized                                        +[    4.370000] ehci-platform 101c0000.ehci: EHCI Host Controller 
-  [    4.990000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver        +[    4.380000] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1 
-  [    5.000000] ehci-platform: EHCI generic platform driver                       +[    4.380000] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000 
-  [    5.160000] U2PHY P0 set SRCTRL calibration value: 6                          +[    4.410000] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00 
-  [    5.160000] ehci-platform 101c0000.ehci: EHCI Host Controller                 +[    4.410000] hub 1-0:1.0: USB hub found 
-  [    5.170000] ehci-platform 101c0000.ehci: new USB bus registered, assigned bu1 +[    4.420000] hub 1-0:1.0: 1 port detected 
-  [    5.170000] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000            +[    4.420000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 
-  [    5.200000] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00           +[    4.430000] ohci-platform: OHCI generic platform driver 
-  [    5.200000] hub 1-0:1.0: USB hub found                                        +[    4.440000] ohci-platform 101c1000.ohci: Generic Platform OHCI controller 
-  [    5.210000] hub 1-0:1.0: 1 port detected                                      +[    4.440000] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2 
-  [    5.210000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver            +[    4.450000] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000 
-  [    5.220000] ohci-platform: OHCI generic platform driver                       +[    4.520000] hub 2-0:1.0: USB hub found 
-  [    5.230000] ohci-platform 101c1000.ohci: Generic Platform OHCI controller     +[    4.520000] hub 2-0:1.0: 1 port detected 
-  [    5.240000] ohci-platform 101c1000.ohci: new USB bus registered, assigned bu2 +[    4.540000] MTK MSDC device init. 
-  [    5.240000] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000            +[    4.580000] mtk-sd: MediaTek MT6575 MSDC Driver 
-  [    5.310000] hub 2-0:1.0: USB hub found                                        +[    4.580000] sdhci: Secure Digital Host Controller Interface driver 
-  [    5.310000] hub 2-0:1.0: 1 port detected                                      +[    4.590000] sdhci: Copyright(c) Pierre Ossman 
-  [    5.330000] MTK MSDC device init.                                             +[    4.590000] sdhci-pltfm: SDHCI platform and OF driver helper 
-  [    5.370000] mtk-sd: MediaTek MT6575 MSDC Driver                               +[    4.600000] usbcore: registered new interface driver usb-storage 
-  [    5.370000] sdhci: Secure Digital Host Controller Interface driver            +[    4.840000] init: - preinit - 
-  [    5.380000] sdhci: Copyright(c) Pierre Ossman                                 +[    5.440000] rt305x-esw 10110000.esw: link changed 0x00 
-  [    5.380000] sdhci-pltfm: SDHCI platform and OF driver helper                  +[    5.620000] random: procd urandom read with 8 bits of entropy available 
-  [    5.390000] usbcore: registered new interface driver usb-storage              +Press the [f] key and hit [enter] to enter failsafe mode 
-  [    5.630000] init: - preinit -                                                 +Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level 
-  [    6.240000] rt305x-esw 10110000.esw: link changed 0x00                        +[    8.870000] mount_root: loading kmods from internal overlay 
-  [    6.370000] random: procd urandom read with 10 bits of entropy available      +[    9.220000] block: attempting to load /etc/config/fstab 
-  Press the [f] key and hit [enter] to enter failsafe mode                         +[    9.220000] block: unable to load configuration (fstab: Entry not found) 
-  Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level     +[    9.230000] block: no usable configuration 
-  [    9.680000] mount_root: loading kmods from internal overlay                   +[    9.240000] mount_root: jffs2 not ready yet, using temporary tmpfs overlay 
-  [   10.090000] jffs2: notice: (456) jffs2_build_xattr_subsystem: complete build. +[    9.260000] procd: - early - 
-  [   10.110000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab    +[    9.270000] procd: - watchdog - 
-  [   10.120000] block: extroot: not configured                                    +[    9.970000] procd: - ubus - 
-  [   10.210000] jffs2: notice: (453) jffs2_build_xattr_subsystem: complete build. +[   11.000000] procd: - init - 
-  [   10.470000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab    +Please press Enter to activate this console. 
-  [   10.480000] block: extroot: not configured                                    +[   12.030000] NET: Registered protocol family 10 
-  [   10.480000] mount_root: switching to jffs2 overlay                            +[   12.110000] ip6_tables: (C) 2000-2006 Netfilter Core Team 
-  [   10.510000] procd: - early -                                                  +[   12.130000] i2c /dev entries driver 
-  [   11.270000] procd: - ubus -                                                   +[   12.330000] PandoraBox MT76X8 AP Driver Version-4.1.0.0(Jul 24 2018 11:42:54). 
-  [   12.280000] procd: - init -                                                   +[   12.370000] i2c-mt7621 10000900.i2c: clock 100 kHz 
-   Please press Enter to activate this console.                                     +[   12.400000] Linux video capture interface: v2.00 
-  [   13.310000] NET: Registered protocol family 10                                +[   12.430000] Enable Ralink GDMA Controller Module  
-  [   13.390000] ip6_tables: (C) 2000-2006 Netfilter Core Team                     +[   12.440000] GDMA IP Version=3 
-  [   13.410000] i2c /dev entries driver                                           +[   12.480000] *******Enter codec_wm8960_i2c_probe******** 
-  [   13.610000] PandoraBox MT76X8 AP Driver Version-4.1.0.0(May 17 2017 15:16:06. +[   12.490000] soc-audio soc-audio: ASoC: machine MTK APSoC I2S should use snd_soc_register_card() 
-  [   13.650000] i2c-ralink 10000900.i2c: loaded                                   +[   12.490000] wm8960 0-001a: No platform data supplied 
-  [   13.680000] Linux video capture interface: v2.00                              +[   12.500000] ****** wm8960_preinit ****** 
-  [   13.710000] Enable Ralink GDMA Controller Module                              +[   13.010000] soc-audio soc-audio: wm8960-hifi <-> mt76xx-i2s mapping ok 
-  [   13.720000] GDMA IP Version=3                                                 +[   13.020000] ip_tables: (C) 2000-2006 Netfilter Core Team 
-  [   13.750000] *******Enter codec_wm8960_i2c_probe********                       +[   13.050000] nf_conntrack version 0.5.0 (1976 buckets, 7904 max) 
-  [   13.760000] soc-audio soc-audio: ASoC: machine MTK APSoC I2S should use snd_) +[   13.110000] usbcore: registered new interface driver uvcvideo 
-  [   13.760000] wm8960 0-001a: No platform data supplied                          +[   13.120000] USB Video Class driver (1.1.1) 
-  [   13.770000] ****** wm8960_preinit ******                                      +[   13.140000] xt_time: kernel timezone is -0000 
-  [   14.280000] soc-audio soc-audio: wm8960-hifi <-> mt76xx-i2s mapping ok        +[   13.160000] PPP generic driver version 2.4.2 
-  [   14.290000] ip_tables: (C) 2000-2006 Netfilter Core Team                      +[   13.170000] NET: Registered protocol family 24 
-  [   14.320000] nf_conntrack version 0.5.0 (1972 buckets, 7888 max)               +ETHMODE 
-  [   14.380000] usbcore: registered new interface driver uvcvideo                 +3 
-  [   14.390000] USB Video Class driver (1.1.1)                                    +[   18.930000] device eth0 entered promiscuous mode 
-  [   14.420000] xt_time: kernel timezone is -0000                                 +[   18.950000] br-lan: port 1(eth0) entered forwarding state 
-  [   14.440000] PPP generic driver version 2.4.2                                  +[   18.950000] br-lan: port 1(eth0) entered forwarding state 
-  [   14.450000] NET: Registered protocol family 24                                +[   20.950000] br-lan: port 1(eth0) entered forwarding state 
-  [   19.730000] device eth0 entered promiscuous mode                              +[   23.530000] ===================================================== 
-  [   19.790000] br-lan: port 1(eth0) entered forwarding state                     +[   23.530000] Channel 1 : Busy Time = 0, Skip Channel = FALSE 
-  [   19.790000] br-lan: port 1(eth0) entered forwarding state                     +[   23.540000] Channel 2 : Busy Time = 0, Skip Channel = FALSE 
-  [   21.790000] br-lan: port 1(eth0) entered forwarding state                     +[   23.540000] Channel 3 : Busy Time = 0, Skip Channel = FALSE 
-  [   23.920000] =====================================================             +[   23.550000] Channel 4 : Busy Time = 0, Skip Channel = FALSE 
-  [   23.920000] Channel 1 : Busy Time = 21849, Skip Channel = FALSE               +[   23.550000] Channel 5 : Busy Time = 0, Skip Channel = FALSE 
-  [   23.930000] Channel 2 : Busy Time = 11012, Skip Channel = FALSE               +[   23.560000] Channel 6 : Busy Time = 0, Skip Channel = FALSE 
-  [   23.930000] Channel 3 : Busy Time = 8873, Skip Channel = FALSE                +[   23.570000] Channel 7 : Busy Time = 0, Skip Channel = FALSE 
-  [   23.940000] Channel 4 : Busy Time = 5601, Skip Channel = FALSE                +[   23.570000] Channel 8 : Busy Time = 0, Skip Channel = FALSE 
-  [   23.950000] Channel 5 : Busy Time = 8448, Skip Channel = FALSE                +[   23.580000] Channel 9 : Busy Time = 2244, Skip Channel = FALSE 
-  [   23.950000] Channel 6 : Busy Time = 11624, Skip Channel = FALSE               +[   23.580000] Channel 10 : Busy Time = 0, Skip Channel = FALSE 
-  [   23.960000] Channel 7 : Busy Time = 6848, Skip Channel = FALSE                +[   23.590000] Channel 11 : Busy Time = 0, Skip Channel = FALSE 
-  [   23.960000] Channel 8 : Busy Time = 8716, Skip Channel = FALSE                +[   23.590000] Channel 12 : Busy Time = 0, Skip Channel = TRUE 
-  [   23.970000] Channel 9 : Busy Time = 15633, Skip Channel = FALSE               +[   23.600000] Channel 13 : Busy Time = 397, Skip Channel = TRUE 
-  [   23.980000] Channel 10 : Busy Time = 21951, Skip Channel = FALSE              +[   23.610000] ===================================================== 
-  [   23.980000] Channel 11 : Busy Time = 15756, Skip Channel = FALSE              +[   23.610000] Rule 3 Channel Busy time value : Min Channel Busy  ==> Select Channel 1  
-  [   23.990000] Channel 12 : Busy Time = 8200, Skip Channel = TRUE                +[   23.620000] Min Channel Busy = 0 
-  [   23.990000] Channel 13 : Busy Time = 4956, Skip Channel = TRUE                +[   23.620000] BW        = 40 
-  [   24.000000] =====================================================             +[   23.650000] |--------------------------------------------------------| 
-  [   24.010000] Rule 3 Channel Busy time value : Min Channel Busy  ==> Select Ch  +[   23.660000] |------------Widora wifi driver--version:1.4-------------| 
-  [   24.010000] Min Channel Busy = 5601                                           +[   23.670000] |Copyright 2016-2018 by WIDORA TECH.  All rights reserved| 
-  [   24.020000] BW        = 20                                                    +[   23.670000] |       This Driver licensing-only runs on Widora HW!    | 
-  [   24.050000] |--------------------------------------------------------|        +[   23.680000] |  Found bug? Please contact widora@qq.com , thanks!     | 
-  [   24.050000] |------------Widora wifi driver--version:1.2-------------|        +[   23.690000] |--------------------------------------------------------| 
-  [   24.060000] |Copyright 2016-2017 by YuanChenMang. All rights reserved|        +[   23.790000] br-lan: port 1(eth0) entered disabled state 
-  [   24.070000] |       This Driver licensing-only runs on Widora!       |        +[   23.800000] device eth0 left promiscuous mode 
-  [   24.070000] |  Found bug? Please contact widora@qq.com , thanks!     |        +[   23.800000] br-lan: port 1(eth0) entered disabled state 
-  [   24.080000] |--------------------------------------------------------|        +[   23.860000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready 
-  [   24.860000] device ra0 entered promiscuous mode                               +[   23.910000] device eth0 entered promiscuous mode 
-  [   24.860000] br-lan: port 2(ra0) entered forwarding state                      +[   23.920000] br-lan: port 1(eth0) entered forwarding state 
-  [   24.870000] br-lan: port 2(ra0) entered forwarding state                      +[   23.920000] br-lan: port 1(eth0) entered forwarding state 
-  [   26.870000] br-lan: port 2(ra0) entered forwarding state        +[   25.250000] device ra0 entered promiscuous mode 
-   +[   25.250000] br-lan: port 2(ra0) entered forwarding state 
-  BusyBox v1.23.2 (2017-12-14 10:42:59 CST) built-in shell (ash)                   +[   25.260000] br-lan: port 2(ra0) entered forwarding state 
-                                                                                 +[   25.920000] br-lan: port 1(eth0) entered forwarding state 
-   _       ___     __                                                              +[   26.250000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0 
-  | |     / (_)___/ /___  _________ _                                              +[   26.300000] jffs2_build_filesystem(): unlocking the mtd device... done. 
-  | | /| / / / __  / __ \/ ___/ __ `/                                              +[   26.300000] jffs2_build_filesystem(): erasing all blocks after the end marker...  
-  | |/ |/ / / /_/ / /_/ / /  / /_/ /                                               +[   27.260000] br-lan: port 2(ra0) entered forwarding state 
-  |__/|__/_/\__,_/\____/_/   \__,_/                                                + 
-   -----------------------------------------------------                           +Widora login: root 
-   CHAOS CALMER (Chaos Calmer, r49378) Version:0.1.7 by mango                      +Password:  
-   -----------------------------------------------------                           + 
-  * 1 1/2 oz Gin            Shake with a glassful                                + 
-  * 1/4 oz Triple Sec       of broken ice and pour                               +BusyBox v1.23.2 (2018-07-19 19:20:30 CST) built-in shell (ash) 
-  * 3/4 oz Lime Juice       unstrained into a goblet.                            + 
-  * 1 1/2 oz Orange Juice                                                        + _       ___     __ 
-  * 1 tsp. Grenadine Syrup                                                       +| |     / (_)___/ /___  _________ _ 
-   -----------------------------------------------------  +| | /| / / / __  / __ \/ ___/ __ `/ 
 +| |/ |/ / / /_/ / /_/ / /  / /_/ / 
 +|__/|__/_/\__,_/\____/_/   \__,_/ 
 + ----------------------------------------------------- 
 + CHAOS CALMER (Chaos Calmer, r49378) Ver:0.1.8-20180813 by WIDORA 
 + ----------------------------------------------------- 
 +root@Widora:~# [   62.360000] random: nonblocking pool is initialized 
 +[  150.230000] done. 
 +[  150.230000] jffs2: notice: (1418) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of . 
 + 
 +                                         
 </code>               </code>              
version.1523513725.txt.gz · Last modified: (external edit)
Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki