User Tools

Site Tools


version

This is an old revision of the document!


uboot版本

uboot的LOG中可以找到如下打印:

Widora by mango,V1.0.7    

代表是1.0.7版本

Ralink UBoot Version: 4.3.0.0  

表示该uboot基于联发科的4300版本构建

Linux内核版本

Linux内核解压缩完打印的第一句就可以找到linux版本:

[    0.000000] Linux version 3.18.29 (mango@localhost) (gcc version 4.8.3 (Open7

Linux3.18.29版本

WIFI驱动版本

WIFI驱动作为一个独立加载的软件栈,有自己的版本:

[   24.050000] |--------------------------------------------------------|       
[   24.050000] |------------Widora wifi driver--version:1.2-------------|       
[   24.060000] |Copyright 2016-2017 by YuanChenMang. All rights reserved|       
[   24.070000] |       This Driver licensing-only runs on Widora!       |       
[   24.070000] |  Found bug? Please contact widora@qq.com , thanks!     |       
[   24.080000] |--------------------------------------------------------|    

代表是1.2版本

[   13.610000] PandoraBox MT76X8 AP Driver Version-4.1.0.0(May 17 2017 15:16:06.

表示该驱动基于Pandorabox的4.1.0.0版本构建

OpenWrt版本

   _       ___     __                                                             
  | |     / (_)___/ /___  _________ _                                             
  | | /| / / / __  / __ \/ ___/ __ `/                                             
  | |/ |/ / / /_/ / /_/ / /  / /_/ /                                              
  |__/|__/_/\__,_/\____/_/   \__,_/                                               
   -----------------------------------------------------                          
   CHAOS CALMER (Chaos Calmer, r49378) Version:0.1.7 by mango                     
   -----------------------------------------------------                          
  * 1 1/2 oz Gin            Shake with a glassful                               
  * 1/4 oz Triple Sec       of broken ice and pour                              
  * 3/4 oz Lime Juice       unstrained into a goblet.                           
  * 1 1/2 oz Orange Juice                                                       
  * 1 tsp. Grenadine Syrup                                                      
   -----------------------------------------------------  

可以看到我们维护的版本是:0.1.7,而CHAOS CALMER则是OpenWrt的CC15.05代号,基于此版本构建。

完整启动LOG

  Widora by mango,V1.0.7                                                          
 
  Board: Ralink APSoC DRAM:  128 MB                                               
  relocate_code Pointer at: 87fb4000                                              
  ***********************                                                         
  Watchdog Reset Occurred                                                         
  ***********************                                                         
  flash manufacture id: c2, device id 20 18                                       
  find flash: MX25L12805D                                                         
  *** Warning - bad CRC, using default environment                                
 
  ============================================                                    
  Ralink UBoot Version: 4.3.0.0                                                   
  --------------------------------------------                                    
  ASIC 7628_MP (Port5<->None)                                                     
  DRAM component: 1024 Mbits DDR, width 16                                        
  DRAM bus: 16 bit                                                                
  Total memory: 128 MBytes                                                        
  Flash component: SPI Flash                                                      
  Date:Dec 26 2017  Time:20:59:50                                                 
  ============================================                                    
  icache: sets:512, ways:4, linesz:32 ,total:65536                                
  dcache: sets:256, ways:4, linesz:32 ,total:32768                                
 
   ##### The CPU freq = 580 MHZ ####                                              
   estimate memory size =128 Mbytes                                               
  RESET MT7628 PHY!!!!!!MT7688 gpio init : wled and wdt by mango                                                                                    
 
  if you press the WPS button will automatically enter the Update mode            
 
  0                                                                               
  *
  *
  *                                                                              
  9                                                                               
  Please choose the operation:                                                    
   1: Load system code to SDRAM via TFTP.                                       
   2: Load system code then write to Flash via TFTP.                            
   3: Boot system code via Flash (default).                                     
   4: Entr boot command line interface.                                         
   5: Entr ALL LED test mode.                                                   
   6: Entr Web failsafe mode.                                                   
   7: Load Boot Loader code then write to Flash via Serial.                     
   9: Load Boot Loader code then write to Flash via TFTP.                       
   0                                                                              
 
  3: System Boot system code via Flash.                                           
  ## Booting image at bc050000 ...                                                
   Image Name:   MIPS OpenWrt Linux-3.18.29                                     
   Image Type:   MIPS Linux Kernel Image (lzma compressed)                      
   Data Size:    1240442 Bytes =  1.2 MB                                        
   Load Address: 80000000                                                       
   Entry Point:  80000000                                                       
   Verifying Checksum ... OK                                                    
   Uncompressing Kernel Image ... OK                                            
  No initrd                                                                       
  ## Transferring control to Linux (at address 80000000) ...                      
  ## Giving linux memsize in MB, 128                                              
 
  Starting kernel ...                                                             
 
  [    0.000000] Linux version 3.18.29 (mango@localhost) (gcc version 4.8.3 (Open7
  [    0.000000] Board has DDR2                                                   
  [    0.000000] Analog PMU set to hw control                                     
  [    0.000000] Digital PMU set to hw control                                    
  [    0.000000] SoC Type: MediaTek MT7688 ver:1 eco:2                            
  [    0.000000] bootconsole [early0] enabled                                     
  [    0.000000] CPU0 revision is: 00019655 (MIPS 24KEc)                          
  [    0.000000] MIPS: machine is Widora-NEO                                      
  [    0.000000] Determined physical RAM map:                                     
  [    0.000000]  memory: 08000000 @ 00000000 (usable)                            
  [    0.000000] Initrd not found or empty - disabling initrd                     
  [    0.000000] Zone ranges:                                                     
  [    0.000000]   Normal   [mem 0x00000000-0x07ffffff]                           
  [    0.000000] Movable zone start for each node                                 
  [    0.000000] Early memory node ranges                                         
  [    0.000000]   node   0: [mem 0x00000000-0x07ffffff]                          
  [    0.000000] Initmem setup node 0 [mem 0x00000000-0x07ffffff]                 
  [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.  
  [    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bys
  [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pa2
  [    0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jf2
  [    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)              
  [    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)   
  [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)     
  [    0.000000] Writing ErrCtl register=0007cff8                                 
  [    0.000000] Readback ErrCtl register=0007cff8                                
  [    0.000000] Memory: 126004K/131072K available (2727K kernel code, 139K rwdat)
  [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1       
  [    0.000000] NR_IRQS:256                                                      
  [    0.000000] intc: using register map from devicetree                         
  [    0.000000] CPU Clock: 580MHz                                                
  [    0.000000] clocksource_of_init: no matching clocksources found              
  [    0.000000] Console: colour dummy device 80x25                               
  [    0.000000] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)          
  [    0.060000] pid_max: default: 32768 minimum: 301                             
  [    0.060000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)      
  [    0.070000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) 
  [    0.070000] pinctrl core: initialized pinctrl subsystem                      
  [    0.080000] NET: Registered protocol family 16                               
  [    0.100000] mt7621_gpio 10000600.gpio: registering 32 gpios                  
  [    0.110000] mt7621_gpio 10000600.gpio: registering 32 gpios                  
  [    0.110000] mt7621_gpio 10000600.gpio: registering 32 gpios                  
  [    0.120000] vgaarb: loaded                                                   
  [    0.120000] Switched to clocksource MIPS                                     
  [    0.130000] NET: Registered protocol family 2                                
  [    0.130000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)  
  [    0.140000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)         
  [    0.140000] TCP: Hash tables configured (established 1024 bind 1024)         
  [    0.150000] TCP: reno registered                                             
  [    0.150000] UDP hash table entries: 256 (order: 0, 4096 bytes)               
  [    0.160000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)          
  [    0.170000] NET: Registered protocol family 1                                
  [    0.170000] futex hash table entries: 256 (order: -1, 3072 bytes)            
  [    0.190000] squashfs: version 4.0 (2009/01/31) Phillip Lougher               
  [    0.190000] jffs2: version 2.2 (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c).
  [    0.200000] msgmni has been set to 246                                       
  [    0.220000] io scheduler noop registered                                     
  [    0.230000] io scheduler deadline registered (default)                       
  [    0.230000] drivers/phy/phy-ralink-usb.c:ralink_usb_phy_probe[336]           
  [    0.240000] drivers/phy/phy-ralink-usb.c:ralink_usb_phy_probe[350]           
  [    0.250000] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled         
  [    0.250000] console [ttyS0] disabled                                         
  [    0.260000] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baudA
  [    0.270000] console [ttyS0] enabled                                          
  [    0.270000] console [ttyS0] enabled                                          
  [    0.270000] bootconsole [early0] disabled                                    
  [    0.270000] bootconsole [early0] disabled                                    
  [    0.280000] 10000d00.uart1: ttyS1 at MMIO 0x10000d00 (irq = 29, base_baud = A
  [    0.290000] 10000e00.uart2: ttyS2 at MMIO 0x10000e00 (irq = 30, base_baud = A
  [    0.300000] spi-mt7621 10000b00.spi: sys_freq: 193333333                     
  [    0.310000] m25p80 spi32766.0: found mx25l12805d, expected w25q128           
  [    0.320000] m25p80 spi32766.0: mx25l12805d (16384 Kbytes)                    
  [    0.320000] m25p80 spi32766.0: using chunked io                              
  [    0.330000] 4 ofpart partitions found on MTD device spi32766.0               
  [    0.330000] Creating 4 MTD partitions on "spi32766.0":                       
  [    0.340000] 0x000000000000-0x000000030000 : "u-boot"                         
  [    0.350000] 0x000000030000-0x000000040000 : "u-boot-env"                     
  [    0.350000] 0x000000040000-0x000000050000 : "factory"                        
  [    0.360000] 0x000000050000-0x000001000000 : "firmware"                       
  [    0.390000] 2 uimage-fw partitions found on MTD device firmware              
  [    0.400000] 0x000000050000-0x00000017edba : "kernel"                         
  [    0.410000] 0x00000017edba-0x000001000000 : "rootfs"                         
  [    0.410000] mtd: device 5 (rootfs) set to be root filesystem                 
  [    0.420000] 1 squashfs-split partitions found on MTD device rootfs           
  [    0.420000] 0x000000640000-0x000001000000 : "rootfs_data"                    
  [    0.430000] fbtft_of_value: buswidth = 8                                     
  [    0.440000] fbtft_of_value: rotate = 0                                       
  [    0.440000] fbtft_of_value: fps = 10                                         
  [    0.440000] fbtft_of_value: txbuflen = 16                                    
  [    1.230000] Console: switching to colour frame buffer device 16x20           
  [    1.240000] graphics fb0: fb_st7735r frame buffer, 128x160, 40 KiB video memz
  [    1.260000] ralink_soc_eth 10100000.ethernet eth0: ralink at 0xb0100000, irq5
  [    1.270000] TCP: cubic registered                                            
  [    1.270000] NET: Registered protocol family 17                               
  [    1.280000] bridge: automatic filtering via arp/ip/ip6tables has been deprec.
  [    1.290000] 8021q: 802.1Q VLAN Support v1.8                                  
  [    1.300000] VFS: Mounted root (squashfs filesystem) readonly on device 31:5. 
  [    1.310000] Freeing unused kernel memory: 212K (8035b000 - 80390000)         
  [    2.560000] init: Console is alive                                           
  [    4.910000] usbcore: registered new interface driver usbfs                   
  [    4.920000] usbcore: registered new interface driver hub                     
  [    4.920000] usbcore: registered new device driver usb                        
  [    4.930000] reg_opt_init                                                     
  [    4.940000] exFAT: Version 1.2.9                                             
  [    4.980000] SCSI subsystem initialized                                       
  [    4.990000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver       
  [    5.000000] ehci-platform: EHCI generic platform driver                      
  [    5.160000] U2PHY P0 set SRCTRL calibration value: 6                         
  [    5.160000] ehci-platform 101c0000.ehci: EHCI Host Controller                
  [    5.170000] ehci-platform 101c0000.ehci: new USB bus registered, assigned bu1
  [    5.170000] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000           
  [    5.200000] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00          
  [    5.200000] hub 1-0:1.0: USB hub found                                       
  [    5.210000] hub 1-0:1.0: 1 port detected                                     
  [    5.210000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver           
  [    5.220000] ohci-platform: OHCI generic platform driver                      
  [    5.230000] ohci-platform 101c1000.ohci: Generic Platform OHCI controller    
  [    5.240000] ohci-platform 101c1000.ohci: new USB bus registered, assigned bu2
  [    5.240000] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000           
  [    5.310000] hub 2-0:1.0: USB hub found                                       
  [    5.310000] hub 2-0:1.0: 1 port detected                                     
  [    5.330000] MTK MSDC device init.                                            
  [    5.370000] mtk-sd: MediaTek MT6575 MSDC Driver                              
  [    5.370000] sdhci: Secure Digital Host Controller Interface driver           
  [    5.380000] sdhci: Copyright(c) Pierre Ossman                                
  [    5.380000] sdhci-pltfm: SDHCI platform and OF driver helper                 
  [    5.390000] usbcore: registered new interface driver usb-storage             
  [    5.630000] init: - preinit -                                                
  [    6.240000] rt305x-esw 10110000.esw: link changed 0x00                       
  [    6.370000] random: procd urandom read with 10 bits of entropy available     
  Press the [f] key and hit [enter] to enter failsafe mode                        
  Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level    
  [    9.680000] mount_root: loading kmods from internal overlay                  
  [   10.090000] jffs2: notice: (456) jffs2_build_xattr_subsystem: complete build.
  [   10.110000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab   
  [   10.120000] block: extroot: not configured                                   
  [   10.210000] jffs2: notice: (453) jffs2_build_xattr_subsystem: complete build.
  [   10.470000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab   
  [   10.480000] block: extroot: not configured                                   
  [   10.480000] mount_root: switching to jffs2 overlay                           
  [   10.510000] procd: - early -                                                 
  [   11.270000] procd: - ubus -                                                  
  [   12.280000] procd: - init -                                                  
   Please press Enter to activate this console.                                    
  [   13.310000] NET: Registered protocol family 10                               
  [   13.390000] ip6_tables: (C) 2000-2006 Netfilter Core Team                    
  [   13.410000] i2c /dev entries driver                                          
  [   13.610000] PandoraBox MT76X8 AP Driver Version-4.1.0.0(May 17 2017 15:16:06.
  [   13.650000] i2c-ralink 10000900.i2c: loaded                                  
  [   13.680000] Linux video capture interface: v2.00                             
  [   13.710000] Enable Ralink GDMA Controller Module                             
  [   13.720000] GDMA IP Version=3                                                
  [   13.750000] *******Enter codec_wm8960_i2c_probe********                      
  [   13.760000] soc-audio soc-audio: ASoC: machine MTK APSoC I2S should use snd_)
  [   13.760000] wm8960 0-001a: No platform data supplied                         
  [   13.770000] ****** wm8960_preinit ******                                     
  [   14.280000] soc-audio soc-audio: wm8960-hifi <-> mt76xx-i2s mapping ok       
  [   14.290000] ip_tables: (C) 2000-2006 Netfilter Core Team                     
  [   14.320000] nf_conntrack version 0.5.0 (1972 buckets, 7888 max)              
  [   14.380000] usbcore: registered new interface driver uvcvideo                
  [   14.390000] USB Video Class driver (1.1.1)                                   
  [   14.420000] xt_time: kernel timezone is -0000                                
  [   14.440000] PPP generic driver version 2.4.2                                 
  [   14.450000] NET: Registered protocol family 24                               
  [   19.730000] device eth0 entered promiscuous mode                             
  [   19.790000] br-lan: port 1(eth0) entered forwarding state                    
  [   19.790000] br-lan: port 1(eth0) entered forwarding state                    
  [   21.790000] br-lan: port 1(eth0) entered forwarding state                    
  [   23.920000] =====================================================            
  [   23.920000] Channel 1 : Busy Time = 21849, Skip Channel = FALSE              
  [   23.930000] Channel 2 : Busy Time = 11012, Skip Channel = FALSE              
  [   23.930000] Channel 3 : Busy Time = 8873, Skip Channel = FALSE               
  [   23.940000] Channel 4 : Busy Time = 5601, Skip Channel = FALSE               
  [   23.950000] Channel 5 : Busy Time = 8448, Skip Channel = FALSE               
  [   23.950000] Channel 6 : Busy Time = 11624, Skip Channel = FALSE              
  [   23.960000] Channel 7 : Busy Time = 6848, Skip Channel = FALSE               
  [   23.960000] Channel 8 : Busy Time = 8716, Skip Channel = FALSE               
  [   23.970000] Channel 9 : Busy Time = 15633, Skip Channel = FALSE              
  [   23.980000] Channel 10 : Busy Time = 21951, Skip Channel = FALSE             
  [   23.980000] Channel 11 : Busy Time = 15756, Skip Channel = FALSE             
  [   23.990000] Channel 12 : Busy Time = 8200, Skip Channel = TRUE               
  [   23.990000] Channel 13 : Busy Time = 4956, Skip Channel = TRUE               
  [   24.000000] =====================================================            
  [   24.010000] Rule 3 Channel Busy time value : Min Channel Busy  ==> Select Ch 
  [   24.010000] Min Channel Busy = 5601                                          
  [   24.020000] BW        = 20                                                   
  [   24.050000] |--------------------------------------------------------|       
  [   24.050000] |------------Widora wifi driver--version:1.2-------------|       
  [   24.060000] |Copyright 2016-2017 by YuanChenMang. All rights reserved|       
  [   24.070000] |       This Driver licensing-only runs on Widora!       |       
  [   24.070000] |  Found bug? Please contact widora@qq.com , thanks!     |       
  [   24.080000] |--------------------------------------------------------|       
  [   24.860000] device ra0 entered promiscuous mode                              
  [   24.860000] br-lan: port 2(ra0) entered forwarding state                     
  [   24.870000] br-lan: port 2(ra0) entered forwarding state                     
  [   26.870000] br-lan: port 2(ra0) entered forwarding state       
 
  BusyBox v1.23.2 (2017-12-14 10:42:59 CST) built-in shell (ash)                  
 
   _       ___     __                                                             
  | |     / (_)___/ /___  _________ _                                             
  | | /| / / / __  / __ \/ ___/ __ `/                                             
  | |/ |/ / / /_/ / /_/ / /  / /_/ /                                              
  |__/|__/_/\__,_/\____/_/   \__,_/                                               
   -----------------------------------------------------                          
   CHAOS CALMER (Chaos Calmer, r49378) Version:0.1.7 by mango                     
   -----------------------------------------------------                          
  * 1 1/2 oz Gin            Shake with a glassful                               
  * 1/4 oz Triple Sec       of broken ice and pour                              
  * 3/4 oz Lime Juice       unstrained into a goblet.                           
  * 1 1/2 oz Orange Juice                                                       
  * 1 tsp. Grenadine Syrup                                                      
   -----------------------------------------------------  
version.1522635619.txt.gz · Last modified: (external edit)

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki