Differences

This shows you the differences between two versions of the page.

--- version [2017/12/28 02:17] – created admin
+++ version [2025/10/14 06:22] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-====完整启动LOG====
+====uboot版本====
+uboot的LOG中可以找到如下打印：
+  Widora by mango,V1.0.7
+代表是1.0.7版本
+  Ralink UBoot Version: 4.3.0.0
+表示该uboot基于联发科的4300版本构建
+====Linux内核版本====
-  Widora by mango,V1.0.7
+Linux内核解压缩完打印的第一句就可以找到linux版本：
-  Board: Ralink APSoC DRAM:  128 MB
-  relocate_code Pointer at: 87fb4000
-  ***********************
-  Watchdog Reset Occurred
-  ***********************
-  flash manufacture id: c2, device id 20 18
-  find flash: MX25L12805D
-  *** Warning - bad CRC, using default environment
-  ============================================
-  Ralink UBoot Version: 4.3.0.0
-  --------------------------------------------
-  ASIC 7628_MP (Port5<->None)
-  DRAM component: 1024 Mbits DDR, width 16
-  DRAM bus: 16 bit
-  Total memory: 128 MBytes
-  Flash component: SPI Flash
-  Date:Dec 26 2017  Time:20:59:50
-  ============================================
-  icache: sets:512, ways:4, linesz:32 ,total:65536
-  dcache: sets:256, ways:4, linesz:32 ,total:32768
-   ##### The CPU freq = 580 MHZ ####
-   estimate memory size =128 Mbytes
-  RESET MT7628 PHY!!!!!!MT7688 gpio init : wled and wdt by mango
-  if you press the WPS button will automatically enter the Update mode
-  *
-  *
-  *
-  Please choose the operation:
-: Load system code to SDRAM via TFTP.
-: Load system code then write to Flash via TFTP.
-: Boot system code via Flash (default).
-: Entr boot command line interface.
-: Entr ALL LED test mode.
-: Entr Web failsafe mode.
-: Load Boot Loader code then write to Flash via Serial.
-: Load Boot Loader code then write to Flash via TFTP.
-: System Boot system code via Flash.
-  ## Booting image at bc050000 ...
-   Image Name:   MIPS OpenWrt Linux-3.18.29
-   Image Type:   MIPS Linux Kernel Image (lzma compressed)
-   Data Size:    1240442 Bytes =  1.2 MB
-   Load Address: 80000000
-   Entry Point:  80000000
-   Verifying Checksum ... OK
-   Uncompressing Kernel Image ... OK
-  No initrd
-  ## Transferring control to Linux (at address 80000000) ...
-  ## Giving linux memsize in MB, 128
-  Starting kernel ...
   [    0.000000] Linux version 3.18.29 (mango@localhost) (gcc version 4.8.3 (Open7
-  [    0.000000] Board has DDR2
+Linux3.18.29版本
-  [    0.000000] Analog PMU set to hw control
-  [    0.000000] Digital PMU set to hw control
+====WIFI驱动版本====
-  [    0.000000] SoC Type: MediaTek MT7688 ver:1 eco:2
+WIFI驱动作为一个独立加载的软件栈，有自己的版本：
-  [    0.000000] bootconsole [early0] enabled
-  [    0.000000] CPU0 revision is: 00019655 (MIPS 24KEc)
-  [    0.000000] MIPS: machine is Widora-NEO
-  [    0.000000] Determined physical RAM map:
-  [    0.000000]  memory: 08000000 @ 00000000 (usable)
-  [    0.000000] Initrd not found or empty - disabling initrd
-  [    0.000000] Zone ranges:
-  [    0.000000]   Normal   [mem 0x00000000-0x07ffffff]
-  [    0.000000] Movable zone start for each node
-  [    0.000000] Early memory node ranges
-  [    0.000000]   node   0: [mem 0x00000000-0x07ffffff]
-  [    0.000000] Initmem setup node 0 [mem 0x00000000-0x07ffffff]
-  [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
-  [    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bys
-  [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pa2
-  [    0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jf2
-  [    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
-  [    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
-  [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
-  [    0.000000] Writing ErrCtl register=0007cff8
-  [    0.000000] Readback ErrCtl register=0007cff8
-  [    0.000000] Memory: 126004K/131072K available (2727K kernel code, 139K rwdat)
-  [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
-  [    0.000000] NR_IRQS:256
-  [    0.000000] intc: using register map from devicetree
-  [    0.000000] CPU Clock: 580MHz
-  [    0.000000] clocksource_of_init: no matching clocksources found
-  [    0.000000] Console: colour dummy device 80x25
-  [    0.000000] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
-  [    0.060000] pid_max: default: 32768 minimum: 301
-  [    0.060000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
-  [    0.070000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
-  [    0.070000] pinctrl core: initialized pinctrl subsystem
-  [    0.080000] NET: Registered protocol family 16
-  [    0.100000] mt7621_gpio 10000600.gpio: registering 32 gpios
-  [    0.110000] mt7621_gpio 10000600.gpio: registering 32 gpios
-  [    0.110000] mt7621_gpio 10000600.gpio: registering 32 gpios
-  [    0.120000] vgaarb: loaded
-  [    0.120000] Switched to clocksource MIPS
-  [    0.130000] NET: Registered protocol family 2
-  [    0.130000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
-  [    0.140000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
-  [    0.140000] TCP: Hash tables configured (established 1024 bind 1024)
-  [    0.150000] TCP: reno registered
-  [    0.150000] UDP hash table entries: 256 (order: 0, 4096 bytes)
-  [    0.160000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
-  [    0.170000] NET: Registered protocol family 1
-  [    0.170000] futex hash table entries: 256 (order: -1, 3072 bytes)
-  [    0.190000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
-  [    0.190000] jffs2: version 2.2 (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c).
-  [    0.200000] msgmni has been set to 246
-  [    0.220000] io scheduler noop registered
-  [    0.230000] io scheduler deadline registered (default)
-  [    0.230000] drivers/phy/phy-ralink-usb.c:ralink_usb_phy_probe[336]
-  [    0.240000] drivers/phy/phy-ralink-usb.c:ralink_usb_phy_probe[350]
-  [    0.250000] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
-  [    0.250000] console [ttyS0] disabled
-  [    0.260000] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baudA
-  [    0.270000] console [ttyS0] enabled
-  [    0.270000] console [ttyS0] enabled
-  [    0.270000] bootconsole [early0] disabled
-  [    0.270000] bootconsole [early0] disabled
-  [    0.280000] 10000d00.uart1: ttyS1 at MMIO 0x10000d00 (irq = 29, base_baud = A
-  [    0.290000] 10000e00.uart2: ttyS2 at MMIO 0x10000e00 (irq = 30, base_baud = A
-  [    0.300000] spi-mt7621 10000b00.spi: sys_freq: 193333333
-  [    0.310000] m25p80 spi32766.0: found mx25l12805d, expected w25q128
-  [    0.320000] m25p80 spi32766.0: mx25l12805d (16384 Kbytes)
-  [    0.320000] m25p80 spi32766.0: using chunked io
-  [    0.330000] 4 ofpart partitions found on MTD device spi32766.0
-  [    0.330000] Creating 4 MTD partitions on "spi32766.0":
-  [    0.340000] 0x000000000000-0x000000030000 : "u-boot"
-  [    0.350000] 0x000000030000-0x000000040000 : "u-boot-env"
-  [    0.350000] 0x000000040000-0x000000050000 : "factory"
-  [    0.360000] 0x000000050000-0x000001000000 : "firmware"
-  [    0.390000] 2 uimage-fw partitions found on MTD device firmware
-  [    0.400000] 0x000000050000-0x00000017edba : "kernel"
-  [    0.410000] 0x00000017edba-0x000001000000 : "rootfs"
-  [    0.410000] mtd: device 5 (rootfs) set to be root filesystem
-  [    0.420000] 1 squashfs-split partitions found on MTD device rootfs
-  [    0.420000] 0x000000640000-0x000001000000 : "rootfs_data"
-  [    0.430000] fbtft_of_value: buswidth = 8
-  [    0.440000] fbtft_of_value: rotate = 0
-  [    0.440000] fbtft_of_value: fps = 10
-  [    0.440000] fbtft_of_value: txbuflen = 16
-  [    1.230000] Console: switching to colour frame buffer device 16x20
-  [    1.240000] graphics fb0: fb_st7735r frame buffer, 128x160, 40 KiB video memz
-  [    1.260000] ralink_soc_eth 10100000.ethernet eth0: ralink at 0xb0100000, irq5
-  [    1.270000] TCP: cubic registered
-  [    1.270000] NET: Registered protocol family 17
-  [    1.280000] bridge: automatic filtering via arp/ip/ip6tables has been deprec.
-  [    1.290000] 8021q: 802.1Q VLAN Support v1.8
-  [    1.300000] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
-  [    1.310000] Freeing unused kernel memory: 212K (8035b000 - 80390000)
-  [    2.560000] init: Console is alive
-  [    4.910000] usbcore: registered new interface driver usbfs
-  [    4.920000] usbcore: registered new interface driver hub
-  [    4.920000] usbcore: registered new device driver usb
-  [    4.930000] reg_opt_init
-  [    4.940000] exFAT: Version 1.2.9
-  [    4.980000] SCSI subsystem initialized
-  [    4.990000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
-  [    5.000000] ehci-platform: EHCI generic platform driver
-  [    5.160000] U2PHY P0 set SRCTRL calibration value: 6
-  [    5.160000] ehci-platform 101c0000.ehci: EHCI Host Controller
-  [    5.170000] ehci-platform 101c0000.ehci: new USB bus registered, assigned bu1
-  [    5.170000] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
-  [    5.200000] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
-  [    5.200000] hub 1-0:1.0: USB hub found
-  [    5.210000] hub 1-0:1.0: 1 port detected
-  [    5.210000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
-  [    5.220000] ohci-platform: OHCI generic platform driver
-  [    5.230000] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
-  [    5.240000] ohci-platform 101c1000.ohci: new USB bus registered, assigned bu2
-  [    5.240000] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
-  [    5.310000] hub 2-0:1.0: USB hub found
-  [    5.310000] hub 2-0:1.0: 1 port detected
-  [    5.330000] MTK MSDC device init.
-  [    5.370000] mtk-sd: MediaTek MT6575 MSDC Driver
-  [    5.370000] sdhci: Secure Digital Host Controller Interface driver
-  [    5.380000] sdhci: Copyright(c) Pierre Ossman
-  [    5.380000] sdhci-pltfm: SDHCI platform and OF driver helper
-  [    5.390000] usbcore: registered new interface driver usb-storage
-  [    5.630000] init: - preinit -
-  [    6.240000] rt305x-esw 10110000.esw: link changed 0x00
-  [    6.370000] random: procd urandom read with 10 bits of entropy available
-  Press the [f] key and hit [enter] to enter failsafe mode
-  Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
-  [    9.680000] mount_root: loading kmods from internal overlay
-  [   10.090000] jffs2: notice: (456) jffs2_build_xattr_subsystem: complete build.
-  [   10.110000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
-  [   10.120000] block: extroot: not configured
-  [   10.210000] jffs2: notice: (453) jffs2_build_xattr_subsystem: complete build.
-  [   10.470000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
-  [   10.480000] block: extroot: not configured
-  [   10.480000] mount_root: switching to jffs2 overlay
-  [   10.510000] procd: - early -
-  [   11.270000] procd: - ubus -
-  [   12.280000] procd: - init -
-   Please press Enter to activate this console.
-  [   13.310000] NET: Registered protocol family 10
-  [   13.390000] ip6_tables: (C) 2000-2006 Netfilter Core Team
-  [   13.410000] i2c /dev entries driver
-  [   13.610000] PandoraBox MT76X8 AP Driver Version-4.1.0.0(May 17 2017 15:16:06.
-  [   13.650000] i2c-ralink 10000900.i2c: loaded
-  [   13.680000] Linux video capture interface: v2.00
-  [   13.710000] Enable Ralink GDMA Controller Module
-  [   13.720000] GDMA IP Version=3
-  [   13.750000] *******Enter codec_wm8960_i2c_probe********
-  [   13.760000] soc-audio soc-audio: ASoC: machine MTK APSoC I2S should use snd_)
-  [   13.760000] wm8960 0-001a: No platform data supplied
-  [   13.770000] ****** wm8960_preinit ******
-  [   14.280000] soc-audio soc-audio: wm8960-hifi <-> mt76xx-i2s mapping ok
-  [   14.290000] ip_tables: (C) 2000-2006 Netfilter Core Team
-  [   14.320000] nf_conntrack version 0.5.0 (1972 buckets, 7888 max)
-  [   14.380000] usbcore: registered new interface driver uvcvideo
-  [   14.390000] USB Video Class driver (1.1.1)
-  [   14.420000] xt_time: kernel timezone is -0000
-  [   14.440000] PPP generic driver version 2.4.2
-  [   14.450000] NET: Registered protocol family 24
-  [   19.730000] device eth0 entered promiscuous mode
-  [   19.790000] br-lan: port 1(eth0) entered forwarding state
-  [   19.790000] br-lan: port 1(eth0) entered forwarding state
-  [   21.790000] br-lan: port 1(eth0) entered forwarding state
-  [   23.920000] =====================================================
-  [   23.920000] Channel 1 : Busy Time = 21849, Skip Channel = FALSE
-  [   23.930000] Channel 2 : Busy Time = 11012, Skip Channel = FALSE
-  [   23.930000] Channel 3 : Busy Time = 8873, Skip Channel = FALSE
-  [   23.940000] Channel 4 : Busy Time = 5601, Skip Channel = FALSE
-  [   23.950000] Channel 5 : Busy Time = 8448, Skip Channel = FALSE
-  [   23.950000] Channel 6 : Busy Time = 11624, Skip Channel = FALSE
-  [   23.960000] Channel 7 : Busy Time = 6848, Skip Channel = FALSE
-  [   23.960000] Channel 8 : Busy Time = 8716, Skip Channel = FALSE
-  [   23.970000] Channel 9 : Busy Time = 15633, Skip Channel = FALSE
-  [   23.980000] Channel 10 : Busy Time = 21951, Skip Channel = FALSE
-  [   23.980000] Channel 11 : Busy Time = 15756, Skip Channel = FALSE
-  [   23.990000] Channel 12 : Busy Time = 8200, Skip Channel = TRUE
-  [   23.990000] Channel 13 : Busy Time = 4956, Skip Channel = TRUE
-  [   24.000000] =====================================================
-  [   24.010000] Rule 3 Channel Busy time value : Min Channel Busy  ==> Select Ch
-  [   24.010000] Min Channel Busy = 5601
-  [   24.020000] BW        = 20
   [   24.050000] |--------------------------------------------------------|
   [   24.050000] |------------Widora wifi driver--version:1.2-------------|
@@ Line 254: / Line 18: @@
   [   24.070000] |       This Driver licensing-only runs on Widora!       |
   [   24.070000] |  Found bug? Please contact widora@qq.com , thanks!     |
   [   24.080000] |--------------------------------------------------------|
-  [   24.860000] device ra0 entered promiscuous mode
+代表是1.2版本
-  [   24.860000] br-lan: port 2(ra0) entered forwarding state
+  [   13.610000] PandoraBox MT76X8 AP Driver Version-4.1.0.0(May 17 2017 15:16:06.
-  [   24.870000] br-lan: port 2(ra0) entered forwarding state
+表示该驱动基于Pandorabox的4.1.0.0版本构建
-  [   26.870000] br-lan: port 2(ra0) entered forwarding state
+====OpenWrt版本====
+<code bash>
+   _       ___     __
+  | |     / (_)___/ /___  _________ _
+  | | /| / / / __  / __ \/ ___/ __ `/
+  | |/ |/ / / /_/ / /_/ / /  / /_/ /
+  |__/|__/_/\__,_/\____/_/   \__,_/
+   -----------------------------------------------------
+   CHAOS CALMER (Chaos Calmer, r49378) Version:0.1.7 by mango
+   -----------------------------------------------------
+  * 1 1/2 oz Gin            Shake with a glassful
+  * 1/4 oz Triple Sec       of broken ice and pour
+  * 3/4 oz Lime Juice       unstrained into a goblet.
+  * 1 1/2 oz Orange Juice
+  * 1 tsp. Grenadine Syrup
+   -----------------------------------------------------
+</code>
+可以看到我们维护的版本是：0.1.7，而CHAOS CALMER则是OpenWrt的CC15.05代号，基于此版本构建。
+====完整启动LOG====
+<code bash>
+Widora by mango,V1.0.8
+Board: Ralink APSoC DRAM:  128 MB
+relocate_code Pointer at: 87fb4000
+flash manufacture id: ef, device id 40 19
+find flash: W25Q256FV
+*** Warning - bad CRC, using default environment
+============================================
+Ralink UBoot Version: 4.3.0.0
+--------------------------------------------
+ASIC 7628_MP (Port5<->None)
+DRAM component: 1024 Mbits DDR, width 16
+DRAM bus: 16 bit
+Total memory: 128 MBytes
+Flash component: SPI Flash
+Date:Jun 12 2018  Time:15:16:26
+============================================
+icache: sets:512, ways:4, linesz:32 ,total:65536
+dcache: sets:256, ways:4, linesz:32 ,total:32768
+ ##### The CPU freq = 580 MHZ ####
+ estimate memory size =128 Mbytes
+RESET MT7628 PHY!!!!!! ONLY 0
+MT7688 gpio init : wled and wdt by mango
+if you press the WPS button will automatically enter the Update mode
+
+
+
+
+
+
+
+
+
+
+Please choose the operation:
+: Load system code to SDRAM via TFTP.
+: Load system code then write to Flash via TFTP.
+: Boot system code via Flash (default).
+: Entr boot command line interface.
+: Entr ALL LED test mode.
+: Entr Web failsafe mode.
+: Load Boot Loader code then write to Flash via Serial.
+: Load Boot Loader code then write to Flash via TFTP.
+
+: System Boot system code via Flash.
+## Booting image at bc050000 ...
+   Image Name:   MIPS OpenWrt Linux-3.18.29
+   Image Type:   MIPS Linux Kernel Image (lzma compressed)
+   Data Size:    1150305 Bytes =  1.1 MB
+   Load Address: 80000000
+   Entry Point:  80000000
+   Verifying Checksum ... OK
+   Uncompressing Kernel Image ... OK
+No initrd
+## Transferring control to Linux (at address 80000000) ...
+## Giving linux memsize in MB, 128
+Starting kernel ...
+[    0.000000] Linux version 3.18.29 (mango@mangodeMBP.lan) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r49378) ) #7 Mon Aug 20 18:37:41 CS8
+[    0.000000] Board has DDR2
+[    0.000000] Analog PMU set to hw control
+[    0.000000] Digital PMU set to hw control
+[    0.000000] SoC Type: MediaTek MT7688 ver:1 eco:2
+[    0.000000] bootconsole [early0] enabled
+[    0.000000] CPU0 revision is: 00019655 (MIPS 24KEc)
+[    0.000000] MIPS: machine is WIDORA-NEO
+[    0.000000] Determined physical RAM map:
+[    0.000000]  memory: 08000000 @ 00000000 (usable)
+[    0.000000] Initrd not found or empty - disabling initrd
+[    0.000000] Zone ranges:
+[    0.000000]   Normal   [mem 0x00000000-0x07ffffff]
+[    0.000000] Movable zone start for each node
+[    0.000000] Early memory node ranges
+[    0.000000]   node   0: [mem 0x00000000-0x07ffffff]
+[    0.000000] Initmem setup node 0 [mem 0x00000000-0x07ffffff]
+[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
+[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
+[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
+[    0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
+[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
+[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
+[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
+[    0.000000] Writing ErrCtl register=00043090
+[    0.000000] Readback ErrCtl register=00043090
+[    0.000000] Memory: 126272K/131072K available (2544K kernel code, 124K rwdata, 520K rodata, 196K init, 185K bss, 4800K reserved)
+[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
+[    0.000000] NR_IRQS:256
+[    0.000000] intc: using register map from devicetree
+[    0.000000] CPU Clock: 580MHz
+[    0.000000] clocksource_of_init: no matching clocksources found
+[    0.000000] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
+[    0.060000] pid_max: default: 32768 minimum: 301
+[    0.060000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
+[    0.070000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
+[    0.070000] pinctrl core: initialized pinctrl subsystem
+[    0.080000] NET: Registered protocol family 16
+[    0.100000] mt7621_gpio 10000600.gpio: registering 32 gpios
+[    0.110000] mt7621_gpio 10000600.gpio: registering 32 gpios
+[    0.110000] mt7621_gpio 10000600.gpio: registering 32 gpios
+[    0.120000] Switched to clocksource MIPS
+[    0.120000] NET: Registered protocol family 2
+[    0.130000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
+[    0.130000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
+[    0.140000] TCP: Hash tables configured (established 1024 bind 1024)
+[    0.140000] TCP: reno registered
+[    0.150000] UDP hash table entries: 256 (order: 0, 4096 bytes)
+[    0.150000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
+[    0.160000] NET: Registered protocol family 1
+[    0.170000] futex hash table entries: 256 (order: -1, 3072 bytes)
+[    0.180000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
+[    0.190000] jffs2: version 2.2 (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
+[    0.200000] msgmni has been set to 246
+[    0.210000] io scheduler noop registered
+[    0.210000] io scheduler deadline registered (default)
+[    0.220000] drivers/phy/phy-ralink-usb.c:ralink_usb_phy_probe[336]
+[    0.220000] drivers/phy/phy-ralink-usb.c:ralink_usb_phy_probe[350]
+[    0.230000] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
+[    0.240000] console [ttyS0] disabled
+[    0.240000] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A
+[    0.250000] console [ttyS0] enabled
+[    0.250000] console [ttyS0] enabled
+[    0.260000] bootconsole [early0] disabled
+[    0.260000] bootconsole [early0] disabled
+[    0.270000] 10000d00.uart1: ttyS1 at MMIO 0x10000d00 (irq = 29, base_baud = 2500000) is a 16550A
+[    0.280000] 10000e00.uart2: ttyS2 at MMIO 0x10000e00 (irq = 30, base_baud = 2500000) is a 16550A
+[    0.290000] spi-mt7621 10000b00.spi: sys_freq: 193333333
+[    0.300000] m25p80 spi32766.0: w25q256 (32768 Kbytes)
+[    0.300000] m25p80 spi32766.0: using chunked io
+[    0.310000] 4 ofpart partitions found on MTD device spi32766.0
+[    0.310000] Creating 4 MTD partitions on "spi32766.0":
+[    0.320000] 0x000000000000-0x000000030000 : "u-boot"
+[    0.320000] 0x000000030000-0x000000040000 : "u-boot-env"
+[    0.330000] 0x000000040000-0x000000050000 : "factory"
+[    0.340000] 0x000000050000-0x000002000000 : "firmware"
+[    0.400000] 2 uimage-fw partitions found on MTD device firmware
+[    0.410000] 0x000000050000-0x000000168da1 : "kernel"
+[    0.420000] 0x000000168da1-0x000002000000 : "rootfs"
+[    0.420000] mtd: device 5 (rootfs) set to be root filesystem
+[    0.430000] 1 squashfs-split partitions found on MTD device rootfs
+[    0.440000] 0x000000620000-0x000002000000 : "rootfs_data"
+[    0.450000] ralink_soc_eth 10100000.ethernet eth0: ralink at 0xb0100000, irq 5
+[    0.460000] mt7621_wdt 10000100.watchdog: Initialized
+[    0.470000] TCP: cubic registered
+[    0.470000] NET: Registered protocol family 17
+[    0.480000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
+[    0.490000] 8021q: 802.1Q VLAN Support v1.8
+[    0.500000] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
+[    0.510000] Freeing unused kernel memory: 196K (8031f000 - 80350000)
+[    1.770000] init: Console is alive
+[    1.780000] init: - watchdog -
+[    4.110000] usbcore: registered new interface driver usbfs
+[    4.120000] usbcore: registered new interface driver hub
+[    4.120000] usbcore: registered new device driver usb
+[    4.130000] reg_opt_init
+[    4.140000] exFAT: Version 1.2.9
+[    4.180000] SCSI subsystem initialized
+[    4.190000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+[    4.200000] ehci-platform: EHCI generic platform driver
+[    4.370000] U2PHY P0 set SRCTRL calibration value: 7
+[    4.370000] ehci-platform 101c0000.ehci: EHCI Host Controller
+[    4.380000] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
+[    4.380000] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
+[    4.410000] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
+[    4.410000] hub 1-0:1.0: USB hub found
+[    4.420000] hub 1-0:1.0: 1 port detected
+[    4.420000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
+[    4.430000] ohci-platform: OHCI generic platform driver
+[    4.440000] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
+[    4.440000] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
+[    4.450000] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
+[    4.520000] hub 2-0:1.0: USB hub found
+[    4.520000] hub 2-0:1.0: 1 port detected
+[    4.540000] MTK MSDC device init.
+[    4.580000] mtk-sd: MediaTek MT6575 MSDC Driver
+[    4.580000] sdhci: Secure Digital Host Controller Interface driver
+[    4.590000] sdhci: Copyright(c) Pierre Ossman
+[    4.590000] sdhci-pltfm: SDHCI platform and OF driver helper
+[    4.600000] usbcore: registered new interface driver usb-storage
+[    4.840000] init: - preinit -
+[    5.440000] rt305x-esw 10110000.esw: link changed 0x00
+[    5.620000] random: procd urandom read with 8 bits of entropy available
+Press the [f] key and hit [enter] to enter failsafe mode
+Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
+[    8.870000] mount_root: loading kmods from internal overlay
+[    9.220000] block: attempting to load /etc/config/fstab
+[    9.220000] block: unable to load configuration (fstab: Entry not found)
+[    9.230000] block: no usable configuration
+[    9.240000] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
+[    9.260000] procd: - early -
+[    9.270000] procd: - watchdog -
+[    9.970000] procd: - ubus -
+[   11.000000] procd: - init -
+Please press Enter to activate this console.
+[   12.030000] NET: Registered protocol family 10
+[   12.110000] ip6_tables: (C) 2000-2006 Netfilter Core Team
+[   12.130000] i2c /dev entries driver
+[   12.330000] PandoraBox MT76X8 AP Driver Version-4.1.0.0(Jul 24 2018 11:42:54).
+[   12.370000] i2c-mt7621 10000900.i2c: clock 100 kHz
+[   12.400000] Linux video capture interface: v2.00
+[   12.430000] Enable Ralink GDMA Controller Module
+[   12.440000] GDMA IP Version=3
+[   12.480000] *******Enter codec_wm8960_i2c_probe********
+[   12.490000] soc-audio soc-audio: ASoC: machine MTK APSoC I2S should use snd_soc_register_card()
+[   12.490000] wm8960 0-001a: No platform data supplied
+[   12.500000] ****** wm8960_preinit ******
+[   13.010000] soc-audio soc-audio: wm8960-hifi <-> mt76xx-i2s mapping ok
+[   13.020000] ip_tables: (C) 2000-2006 Netfilter Core Team
+[   13.050000] nf_conntrack version 0.5.0 (1976 buckets, 7904 max)
+[   13.110000] usbcore: registered new interface driver uvcvideo
+[   13.120000] USB Video Class driver (1.1.1)
+[   13.140000] xt_time: kernel timezone is -0000
+[   13.160000] PPP generic driver version 2.4.2
+[   13.170000] NET: Registered protocol family 24
+ETHMODE
+
+[   18.930000] device eth0 entered promiscuous mode
+[   18.950000] br-lan: port 1(eth0) entered forwarding state
+[   18.950000] br-lan: port 1(eth0) entered forwarding state
+[   20.950000] br-lan: port 1(eth0) entered forwarding state
+[   23.530000] =====================================================
+[   23.530000] Channel 1 : Busy Time = 0, Skip Channel = FALSE
+[   23.540000] Channel 2 : Busy Time = 0, Skip Channel = FALSE
+[   23.540000] Channel 3 : Busy Time = 0, Skip Channel = FALSE
+[   23.550000] Channel 4 : Busy Time = 0, Skip Channel = FALSE
+[   23.550000] Channel 5 : Busy Time = 0, Skip Channel = FALSE
+[   23.560000] Channel 6 : Busy Time = 0, Skip Channel = FALSE
+[   23.570000] Channel 7 : Busy Time = 0, Skip Channel = FALSE
+[   23.570000] Channel 8 : Busy Time = 0, Skip Channel = FALSE
+[   23.580000] Channel 9 : Busy Time = 2244, Skip Channel = FALSE
+[   23.580000] Channel 10 : Busy Time = 0, Skip Channel = FALSE
+[   23.590000] Channel 11 : Busy Time = 0, Skip Channel = FALSE
+[   23.590000] Channel 12 : Busy Time = 0, Skip Channel = TRUE
+[   23.600000] Channel 13 : Busy Time = 397, Skip Channel = TRUE
+[   23.610000] =====================================================
+[   23.610000] Rule 3 Channel Busy time value : Min Channel Busy  ==> Select Channel 1
+[   23.620000] Min Channel Busy = 0
+[   23.620000] BW        = 40
+[   23.650000] |--------------------------------------------------------|
+[   23.660000] |------------Widora wifi driver--version:1.4-------------|
+[   23.670000] |Copyright 2016-2018 by WIDORA TECH.  All rights reserved|
+[   23.670000] |       This Driver licensing-only runs on Widora HW!    |
+[   23.680000] |  Found bug? Please contact widora@qq.com , thanks!     |
+[   23.690000] |--------------------------------------------------------|
+[   23.790000] br-lan: port 1(eth0) entered disabled state
+[   23.800000] device eth0 left promiscuous mode
+[   23.800000] br-lan: port 1(eth0) entered disabled state
+[   23.860000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
+[   23.910000] device eth0 entered promiscuous mode
+[   23.920000] br-lan: port 1(eth0) entered forwarding state
+[   23.920000] br-lan: port 1(eth0) entered forwarding state
+[   25.250000] device ra0 entered promiscuous mode
+[   25.250000] br-lan: port 2(ra0) entered forwarding state
+[   25.260000] br-lan: port 2(ra0) entered forwarding state
+[   25.920000] br-lan: port 1(eth0) entered forwarding state
+[   26.250000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
+[   26.300000] jffs2_build_filesystem(): unlocking the mtd device... done.
+[   26.300000] jffs2_build_filesystem(): erasing all blocks after the end marker...
+[   27.260000] br-lan: port 2(ra0) entered forwarding state
+Widora login: root
+Password:
+BusyBox v1.23.2 (2018-07-19 19:20:30 CST) built-in shell (ash)
+ _       ___     __
+| |     / (_)___/ /___  _________ _
+| | /| / / / __  / __ \/ ___/ __ `/
+| |/ |/ / / /_/ / /_/ / /  / /_/ /
+|__/|__/_/\__,_/\____/_/   \__,_/
+ -----------------------------------------------------
+ CHAOS CALMER (Chaos Calmer, r49378) Ver:0.1.8-20180813 by WIDORA
+ -----------------------------------------------------
+root@Widora:~# [   62.360000] random: nonblocking pool is initialized
+[  150.230000] done.
+[  150.230000] jffs2: notice: (1418) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of .
+</code>