Widora出厂固件默认支持了VFAT,EXFAT,EXT4等文件系统格式。如果U盘或TF卡不是这几种格式,请格式化成此种格式。
一般U盘对应的设备文件在/dev/下sda,sdb,sdc这些,而SD卡则是mmcblk0,mmcblk0p1等。

插入U盘,默认串口控制台会打印如下:

root@Widora:/# [ 2531.690000] usb 1-1: new high-speed USB device number 2 usingm
[ 2531.840000] usb-storage 1-1:1.0: USB Mass Storage device detected            
[ 2531.850000] scsi host0: usb-storage 1-1:1.0                                  
[ 2532.850000] scsi 0:0:0:0: Direct-Access     SanDisk  Cruzer Blade     1.27 P6
[ 2532.860000] sd 0:0:0:0: [sda] 15330304 512-byte logical blocks: (7.84 GB/7.3)
[ 2532.870000] sd 0:0:0:0: [sda] Write Protect is off                           
[ 2532.870000] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doA
[ 2532.900000]  sda: sda1                                                       
[ 2532.910000] sd 0:0:0:0: [sda] Attached SCSI removable disk                   
[ 2533.190000] FAT-fs (sda1): Volume was not properly unmounted. Some data may .

U盘会自动挂载至“/tmp/mounts/“目录:

root@Widora:/# cd /tmp/mounts/                                                  
root@Widora:/tmp/mounts# ls                                                     
USB-A1 

此时进入USB-A1可以看到U盘的文件列表:

root@Widora:/tmp/mounts# cd USB-A1/                                             
root@Widora:/tmp/run/mountd/sda1# ls       
test 1.mp3 

TF卡挂载同理,也会挂载至”/tmp/mounts/“目录。