This is an old revision of the document!
Table of Contents
Introduction
This micro development board is specially designed to run Linux. Despite a mini body, it has all the vital functions. Equipped with T113-s3(Cortex-A7 dual core) as the maincontroller chip, the board offers various commonly-used peripheral ports: GPIO, I2C & SPI, SDIO, Audio port(record, play), Video(RGB666 Display, touch, DVP, DSI and LVDS), USB Host, OTG, etc. Besides, the board comes with a built-in 64MB DDR and onboard WiFi, which fully supports Linux ecology and running complete Python.
Spectification
- T113-s3 with 128MB DDR3, Cortex-A7 dual core up to 1GHz
- USB-OTG Type-C
- USB-HOST Type-C
- 22Pin expand x2
- TF card
- RTL8189F WiFi or other WiFi/BT module
- 15Pins DSI FPC connector
- 40Pins RGB FPC connector
- 6Pins CTP FPC connector
- MIC x 1
- 24Pins DVP FPC connector
- Fel,reset button
- 4x4cm size
Model
- MQ1DW：WiFi version, no NAND FLASH, with WiFi
Version
- V1.6：first production version
Hardware
Firmware and burn
Operating System
- Linux-SDK:
linux_audio_开发指南.pdf linux_ce开发指南.pdflinux_ccu_开发指南.pdflinux_cpufreq_开发指南.pdflinux_cpuidle_开发指南.pdflinux_device_tree_使用指南.pdflinux_display_开发指南.pdflinux_dmac_开发指南.pdflinux_emac_开发指南.pdflinux_g2d_开发指南.pdflinux_gki_开发指南.pdflinux_gpadc_开发指南.pdflinux_gpio_开发指南.pdflinux_gpu_开发指南.pdflinux_hdmi20_开发指南.pdflinux_ir_rx_开发指南.pdflinux_ir_tx_开发指南.pdflinux_ir_开发指南.pdflinux_lcd_开发指南.pdflinux_lradc_开发指南.pdflinux_media_开发指南.pdflinux_mipi_csi_开发指南.pdflinux_pmic_开发指南.pdflinux_rtc_开发指南.pdflinux_sid_开发指南.pdflinux_spi_开发指南.pdflinux_spi-nand_开发指南.pdflinux_spl-pub_开发指南.pdflinux_thermal_开发指南.pdflinux_twi_开发指南.pdflinux_uart_开发指南.pdflinux_u-boot_开发指南.pdflinux_usb_开发指南.pdflinux_安全_开发指南.pdflinux_离线烧录_开发指南.pdft113_longan_linux_sdk开发环境配置手册.pdf