welcome to see widora.cn

This micro development board is specially designed to run Linux. Despite a mini body, it has all the vital functions. Equipped with F1C200S as the maincontroller chip, the board offers various commonly-used peripheral ports: GPIO, I2C & SPI, SDIO, Audio port(record, play), Video(RGB565 Display, touch, DVP), USB Host, OTG, etc. Besides, the board comes with a built-in 64MB DDR and onboard 128MB Nand Flash, which fully supports Linux ecology and running complete Python.

Currently, this product is fully open source so that users are allowed to compile any module according to their own requirements. However, it’s mainly for Python developers and senior enthusiasts as it’s a little difficult to get started.

• Built-in 64MB DDR
• On-board 128MB Nand Flash
• 420MHz system clock default frequency, able to be overclocked to 700MHz and above
• Rich GPIO pins
• Onboard SDIO port for connecting SD card or SDIO WiFi + BT module
• DVP camera interface in support of cameras such as OV2640, GC0328, etc.
• RGB565 display interface and 6-wire touch interface
• Onboard mic and power amplifier
• Low power consumption
• Support complete Python running

MPi-R（原TINY200）是针对全志超低价F1C200s设计的小型ARM-Linux原型板，一体化设计，迷你, 资源：

1. USB-TTL串口控制台（开发必备）
2. microUSB OTG口（fel方式刷机、接U盘、键盘、摄像头、usb网卡等）
3. 16M nor FLASH 或者 128M nand flash
4. TF卡槽，可接TF卡或TF-WiFi
5. 40P通用RGB FPC排座下接触
6. 板载电阻触摸芯片NS2009
7. 6P通用电容触摸FPC排座
8. 板载MIC*1
9. BOOT按键、复位按键
10. 5×2.2cm纤瘦尺寸，2.54排针引出所有资源，双排针间隔20.32mm适合面包板
11. 24Pin DVP接口(only R2 R3)
12. D类音频功放（only R2 R3）

R1（首次发布，可搭配电阻触摸屏） 
R2（在R1基础上增加DVP接口和音频功放） 
R3（修复R2的触摸中断，新增电容触摸屏及Buildroot支持，主要发售SPI NAND版本）

• 英文： https://wiki.dfrobot.com/MangoPi_R3_SKU_DFR0780